Base to output center height | 3.9900 in, 101.346 mm |
Case size | 35 |
Center distance (in) | 3.5 in, Center distance (in):3.5000 in, 88.9 mm |
Center to end of shaft distance | 7.0600 in, 179.324 mm |
Finish | Silver-gray epoxy |
Gearbox component type | Gearbox |
Horsepower rating input | 10.0000 hp, 7.457 kW |
Horsepower rating output | 9.1900 hp, 6.853 kW |
Housing material | Cast iron |
Input | 56C flange |
Input flange | 56C |
Input HP, Nominal ratio | 10 |
Input style | Quill |
Lubrication type | PAG, standard temperature |
Motor compatibility | NEMA motor, 56C frame |
Mounting bolt pattern length | 7.5000 in, 190.5 mm |
Mounting bolt pattern width | 4.0000 in, 101.6 mm |
Output | Right side solid output shaft |
Output bore/shaft diameter | 1.5 in |
Output horse power | 9.19 |
Output shaft center to input motor mounting face distance | 7.0900 in, 180.086 mm |
Output style | Right |
Overhung load | 2700 lbf, 12010.198 N |
Paint type | Stainless epoxy |
Paint/coating | Green |
Rated torque output | 3310 in/lb, 3310.0 in/lb |
Ratio | 10 to 1 |
Seal type | Two-piece harsh duty |
Shaft diameter output | 1.5000 in, 38.1 mm |
Shaft length output | 3.5100 in, 89.154 mm |
Suitable for washdown | Yes |
Thermal horsepower rating | 10.6300 hp, 7.927 kW |