| Base to output center height | 4.4400 in, 112.776 mm |
| Case size | 40 |
| Center distance (in) | 4 in, Center distance (in):4.0000 in, 101.6 mm |
| Center to end of shaft distance | 8.1200 in, 206.248 mm |
| Finish | White epoxy |
| Gearbox component type | Gearbox |
| Horsepower rating input | 6.3500 hp, 4.735 kW |
| Horsepower rating output | 5.2500 hp, 3.915 kW |
| Housing material | Cast iron |
| Input | 180TC flange |
| Input flange | 180TC |
| Input HP | 6.35 |
| Input style | 3-Piece coupled |
| Lubrication type | PAG, standard temperature |
| Motor compatibility | NEMA motor, 180TC frame |
| Mounting bolt pattern length | 8.5000 in, 215.9 mm |
| Mounting bolt pattern width | 5.0000 in, 127.0 mm |
| Nominal ratio | 25 |
| Output | Right side solid output shaft |
| Output bore/shaft diameter | 1.875 in |
| Output horse power | 5.25 |
| Output shaft center to input motor mounting face distance | 12.5700 in, 319.278 mm |
| Output style | Right |
| Overhung load | 4300 lbf, 19127.353 N |
| Paint type | White epoxy |
| Paint/coating | White |
| Rated torque output | 4722 in/lb, 4722.0 in/lb |
| Ratio | 25 to 1 |
| Seal type | Single-lip contact |
| Shaft diameter output | 1.8750 in, 47.625 mm |
| Shaft length output | 3.7600 in, 95.504 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 6.4500 hp, 4.81 kW |