Base to output center height | 4.4400 in, 112.776 mm |
Case size | 40 |
Center distance (in) | 4 in, Center distance (in):4.0000 in, 101.6 mm |
Center to end of shaft distance | 8.1200 in, 206.248 mm |
Finish, Paint type | White epoxy |
Gearbox component type | Gearbox |
Horsepower rating input | 7.7500 hp, 5.779 kW |
Horsepower rating output | 6.6900 hp, 4.989 kW |
Housing material | Cast iron |
Input | 210TC flange |
Input flange | 210TC |
Input HP | 7.75 |
Input style | Quill |
Lubrication type | PAG, standard temperature |
Motor compatibility | NEMA motor, 210TC frame |
Mounting bolt pattern length | 8.5000 in, 215.9 mm |
Mounting bolt pattern width | 5.0000 in, 127.0 mm |
Nominal ratio | 20 |
Output | Left side solid output shaft |
Output bore/shaft diameter | 1.875 in |
Output horse power | 6.69 |
Output shaft center to input motor mounting face distance | 8.8300 in, 224.282 mm |
Output style | Left |
Overhung load | 4300 lbf, 19127.353 N |
Paint/coating | White |
Rated torque output | 4822 in/lb, 4822.0 in/lb |
Ratio | 20 to 1 |
Seal type | Single-lip contact |
Shaft diameter output | 1.8750 in, 47.625 mm |
Shaft length output | 3.7600 in, 95.504 mm |
Suitable for washdown | No |
Thermal horsepower rating | 8.1400 hp, 6.07 kW |