| Base to output center height | 5.3100 in, 134.874 mm |
| Case size | 47 |
| Center distance (in) | 4.7 in, Center distance (in):4.7500 in, 120.65 mm |
| Center to end of shaft distance | 9.0600 in, 230.124 mm |
| Finish, Paint type | White epoxy |
| Gearbox component type | Gearbox |
| Horsepower rating input | 19.2700 hp, 14.37 kW |
| Horsepower rating output | 17.7400 hp, 13.229 kW |
| Housing material | Cast iron |
| Input | 250TC Flange |
| Input flange | 250TC |
| Input HP | 19.27 |
| Input style | 3-Piece coupled |
| Lubrication type | PAG, standard temperature |
| Motor compatibility | NEMA motor, 250TC frame |
| Mounting bolt pattern length | 11.0000 in, 279.4 mm |
| Mounting bolt pattern width | 5.8100 in, 147.574 mm |
| Nominal ratio | 10 |
| Output | Left side solid output shaft |
| Output bore/shaft diameter | 2 in |
| Output horse power | 17.74 |
| Output shaft center to input motor mounting face distance | 14.5100 in, 368.554 mm |
| Output style | Left |
| Overhung load | 5600 lbf, 24910.041 N |
| Paint/coating | White |
| Rated torque output | 6390 in/lb, 6390.0 in/lb |
| Ratio | 10 to 1 |
| Seal type | Single-lip contact |
| Shaft diameter output | 2.0000 in, 50.8 mm |
| Shaft length output | 4.0100 in, 101.854 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 20.0800 hp, 14.974 kW |