| Bend Radius | 9" |
| Burst Pressure | 600 psi |
| Compatible Chemicals | Acetic Acid (Glacial), Acetic Acid 20%, Chromic Acid 5%, Chromic Acid 10%, Citric Acid 50%, Formic Acid, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sulfuric Acid (to 10%), Methyl Ethyl Ketone (MEK), Isopropyl (Isopropanol), Methyl (Methanol), Antifreeze (Coolant), Ethylene Glycol, Glycerin, Calcium Chloride, Sodium Bicarbonate (10%), Cyclohexane, Ethyl Acetate, Formaldehyde 40%, Formaldehyde, Ammonium Hydroxide, Potassium Hydroxide (50%), Fresh Water, Salt Water, Sodium Bisulfate, Sodium Bisulfite, Fertilizers, Air, Carbon Dioxide, Oxygen |
| Country of Origin (subject to change) | Unknown |
| For Media Type | Acetic Acid, Chromic Acid, Citric Acid, Formic Acid, Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid, Phosphoric Acid (40% Solution), Sulfuric Acid, Ketones, Isopropanol, Methanol, Antifreeze, Ethylene Glycol, Glycerin, Calcium Chloride, Sodium Bicarbonate, Cyclohexane, Ethyl Acetate, Formaldehyde, Ammonium Hydroxide, Potassium Hydroxide (50%), Water, Sodium Bisulfate, Sodium Bisulfite, Fertilizers, Air, Carbon Dioxide, Oxygen |
| Hose Color | Yellow |
| Hose Configuration | Bulk Hose |
| Hose Cover Material, Hose Tube Material | EPDM |
| Hose Inside Dia. | 3" |
| Hose Length | 100 ft. |
| Hose Outside Dia. | 3-15/16" |
| Hose Reinforcement Material | Not Reinforced |
| Item | Bulk Chemical Hose |
| Max. Working Pressure @ 70 F | 150 psi |
| Not Recommended Chemicals | Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Biodiesel, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Lacquer Thinners, Toluene, Xylene, Motor Oil, Methyl Chloride, Trichlorethylene (50%), E85, Automatic Transmission Fluid, Brake Fluid, Naphtha, Paint, Turpentine, Fuel Oil, Lubricated Air, Mineral Oil , Steam, Vegetable Oil, Solvents |
| Safety Factor | 4:1 |
| Standards | FDA |
| Static Control Wire | No |
| Temp. Range | -45 Degrees to 180 Degrees F |
