mpn:
brand:
manufacturer:
MPN:
Description:
20:1 Ratio, 0.625" Input Diameter, 0.875" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key ^ | Value |
|---|---|
| Assembly | BMQ-R |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions, No. of Gear Reductions, Reducer Type | Single |
| Gear Type | Worm |
| Height (in) | 10.50 |
| Housing material | Cast iron |
| HP Range | 1 to 1-1/2 ( |
| Input Bore (C Face), Input Diameter (in) | 0.625 |
| Input Flange, Motor Frame Size, Size | 56C |
| Input HP | 1.283 |
| Input HP, Input HP @ 1750 RPM | 1.046 |
| Input RPM | 1750, 2500 |
| Input Style | C-Face quill, Quill |
| Keyway | 3/16 X 3/32 |
| Length (in) | 10.69 |
| Max OHL (Output Shaft), Overhung Load | 1200 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | BMQ818 |
| Mounting Style | Base |
| Output Diameter (in), Output HP | 0.875 |
| Output Key | 3/16 X 1.38 |
| Output RPM | 87 |
| Output Shaft Assembly Code, Output Shaft Orientation, Output Style | R |
| Output Torque | 630 |
| Output Torque (lb-in) | 551 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Solid Shaft |
| Output, Output Shaft Direction | Right |
| Paint/Coating | Blue |
| Product Line, Series | GR Series - Ironman Worm Gear Reducers |
| Product Type | Worm Speed Reducer |
| Ratio | 20 to 1 |
| Ratio Range | 20-1 |
| Reducer, Reducer Style | Worm - Right Angle |
| Series Code | GR |
| Series Style | GR-BMQ-R |
| Series Type | Cast Iron 800 Worm Gear Reducers |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Width (in) | 9.06 |