mpn:
brand:
manufacturer:
MPN:
Description:
40:1 Ratio, 0.5" Input Diameter, 0.875" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key ^ | Value |
|---|---|
| Assembly | BMQ-L |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions, No. of Gear Reductions, Reducer Type | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 1/2 to 3/4 HP ( |
| Input Bore (C Face), Input Diameter (in) | 0.5 |
| Input Flange, Size | 48CZ |
| Input HP | 0.113 |
| Input HP, Input HP @ 1750 RPM | 0.609 |
| Input RPM | 100 |
| Input Style | C-Face quill, Quill |
| Max OHL (Output Shaft), Overhung Load | 1200 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | BMQ818 |
| Motor Frame Size | 48 |
| Mounting Style | Base |
| Output Diameter (in) | 0.875 |
| Output HP | 0.44 |
| Output Key | 3/16 x 1.38 |
| Output RPM | 43 |
| Output Shaft Assembly Code, Output Shaft Orientation, Output Style | L |
| Output Torque | 634 |
| Output Torque (lb-in) | 874 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Solid Shaft |
| Output, Output Shaft Direction | Left |
| Paint/Coating | Blue |
| Product Line, Series | GR Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 40 to 1 |
| Ratio Range | 40-1 |
| Reducer, Reducer Style | Worm - Right Angle |
| Series Code | GR |
| Series Style | GR-BMQ-L |
| Service Factor | 1 |
| Shaft Seal Material | Viton |