mpn:
brand:
manufacturer:
MPN:
Description:
80:1 Ratio, 0.625" Input Diameter, 1" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key ^ | Value |
|---|---|
| Assembly | H-H1 |
| Bore Code | 16 |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions, No. of Gear Reductions, Reducer Type | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 0.1HP to ( |
| Input Diameter (in) | 0.625 |
| Input HP | 0.247 |
| Input HP, Input HP @ 1750 RPM | 0.208 |
| Input RPM | 1750, 2500 |
| Input Style | Solid Input Shaft, Solid Shaft |
| Max OHL (Output Shaft) | 1200 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | H818 |
| Mounting Style | Shaft Mount |
| Output | Hollow |
| Output Diameter (in), Service Factor | 1 |
| Output Hollow Shaft Diameter (in) | 1.000 |
| Output HP | 0.124 |
| Output Key | 1/4 X 2.50 |
| Output RPM | In Stock |
| Output Shaft Assembly Code, Output Shaft Direction, Output Shaft Orientation, Output Style | H1 |
| Output Torque | 356 |
| Output Torque (lb-in) | 314 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Blue |
| Product Line, Series | GR Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 80 to 1 |
| Ratio Range | 80-1 |
| Reducer, Reducer Style | Worm - Right Angle |
| Series Code | GR |
| Series Style | GR-H-H1 |
| Shaft Seal Material | Viton |