mpn:
brand:
manufacturer:
MPN:
Description:
7.5:1 Ratio, 1.125" Input Diameter, 1.25" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key | Value |
|---|---|
| Assembly | HMQ-H1 |
| Bore Code | 20 |
| Center Distance | 2.4 In. |
| Center distance (in) | 2.38 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 3 HP to ( |
| Input Bore (C Face) | 1.125 |
| Input Diameter (in) | 1.125 |
| Input Flange | 182-4TC |
| Input HP | 0.502, 3.992 |
| Input HP @ 1750 RPM | 3.992 |
| Input RPM | 100, 1750 |
| Input Style | C-Face quill, Quill |
| Max OHL (Output Shaft) | 1770 |
| Max Thrust Load (Output Shaft) | 1659 |
| Model Code | HMQ824 |
| Motor Frame Size | 180 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 1.25 |
| Output Hollow Shaft Diameter (in) | 1.250 |
| Output HP | 3.685 |
| Output Key | 1/4 X 2.50 |
| Output RPM | 233.3 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 995 |
| Output Torque (lb-in) | 1689 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Blue |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 7.5 to 1 |
| Ratio Range | 7.5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GR Series - Ironman Worm Gear Reducers |
| Series Code | GR |
| Series Style | GR-HMQ-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 180TC |