mpn:
brand:
manufacturer:
MPN:
Description:
30:1 Ratio, 0.875" Input Diameter, 2.188" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key ^ | Value |
|---|---|
| Assembly | HMQ-H1 |
| Bore Code | 35 |
| Center Distance | 4.2 In. |
| Center distance (in) | 4.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions, No. of Gear Reductions, Reducer Type | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 5 HP to ( |
| Input Bore (C Face), Input Diameter (in) | 0.875 |
| Input Flange | 143-5TC |
| Input HP | 7.517 |
| Input HP, Input HP @ 1750 RPM | 6.481 |
| Input RPM | 1750, 2500 |
| Input Style | C-Face quill, Quill |
| Max OHL (Output Shaft) | 3550 |
| Max Thrust Load (Output Shaft) | 2533 |
| Model Code | HMQ842 |
| Motor Frame Size, Size | 140TC |
| Mounting Style | Shaft Mount |
| Output | Hollow |
| Output Diameter (in), Output Hollow Shaft Diameter (in) | 2.188 |
| Output HP | 5.517 |
| Output Key | 1/2 X 3.38 |
| Output RPM | 58 |
| Output Shaft Assembly Code, Output Shaft Direction, Output Shaft Orientation, Output Style | H1 |
| Output Torque | 5960 |
| Output Torque (lb-in) | 4882 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Blue |
| Product Line, Series | GR Series - Ironman Worm Gear Reducers |
| Product Type | Worm Speed Reducer |
| Ratio | 30 to 1 |
| Ratio Range | 30-1 |
| Reducer, Reducer Style | Worm - Right Angle |
| Series Code | GR |
| Series Style | GR-HMQ-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |