mpn:
brand:
manufacturer:
MPN:
Description:
40:1 Ratio, 1.125" Input Diameter, 2.5" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key ^ | Value |
|---|---|
| Assembly | HMQ-H1 |
| Bore Code | 40 |
| Center Distance | 5.2 In. |
| Center distance (in) | 5.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions, No. of Gear Reductions, Reducer Type | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 7-1/2 ( |
| Input Bore (C Face), Input Diameter (in) | 1.125 |
| Input Flange, Motor Frame Size, Size | 180TC |
| Input HP, Input HP @ 1750 RPM | 8.105 |
| Input RPM | 1750 |
| Input Style | C-Face quill, Quill |
| Max OHL (Output Shaft) | 3560 |
| Max Thrust Load (Output Shaft) | 3412 |
| Model Code | HMQ852 |
| Mounting Style | Shaft Mount |
| Output | Hollow |
| Output Diameter (in) | 2.5 |
| Output Hollow Shaft Diameter (in) | 2.500 |
| Output HP | 6.538 |
| Output Key | 5/8 X 4.00 |
| Output RPM | 43 |
| Output Shaft Assembly Code, Output Shaft Direction, Output Shaft Orientation, Output Style | H1 |
| Output Torque | 9419 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Blue |
| Product Line, Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 40 to 1 |
| Ratio Range | 40-1 |
| Reducer, Reducer Style | Worm - Right Angle |
| Series Code | NH |
| Series Style | NH-HMQ-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |