| Accuracy | ? 0.2% of range, +/-2% of Range |
| Ambient temp. | F: -31? to 140? / C: -35? to 60? |
| Approval | UL 61010-1 |
| Beam width | 6" (15.2 cm.) |
| Beam Width | 6 in |
| Classification | General purpose |
| Compliance | CE, RoHS |
| Conduit entrance | 1/2" NPT |
| Configuration | Push button or WebCal PC Windows USB 2.0 |
| Dead Band | 18 in |
| Dead band | 18" (45.7 cm.) |
| Display | 6-digit, LCD |
| Display type | LCD, 6-digit |
| Display units | Inch, cm or percent |
| Encl. cap material | Clear polycarbonate |
| Encl. material | Polypropylene |
| Enclosure rating | Type 6P (IP68) |
| Enclosure vent | Water tight membrane |
| Height | 6.9 in |
| Input Voltage | 14 to 28V DC |
| Item | Reflective Ultrasonic Level Sensor |
| Loop resistance | 500 ohms at 24 VDC |
| Max. consumption | 0.5W |
| Memory | Non-volatile |
| Mount gasket | N/A |
| Mounting | 3 in NPT |
| Pressure | 30 psi (2 bar) |
| Process mount | 3" NPT |
| Process temp. | F: -40? to 176? / C: -40? to 80? |
| Range | 18 in to 39.3 ft, 18" to 39.3' (45.7 cm to 12 m.) |
| Resolution | 0.196 in, 0.196" (5 mm.) |
| Signal fail-safe | 4mA, 20mA, 21mA, 22mA, hold last |
| Signal invert | 4-20mA or 20-4mA |
| Signal output | 4-20mA, two-wire |
| Supply voltage | 14-28 VDC |
| Temp. comp. | Automatic |
| Transducer mat. | Polyvinylidene fluoride |
| Transducer type | Reflective |
| Width | 4.0 in |