| Key ^ | Value |
|---|---|
| Bearing Protection | Water Slingers |
| Body Dia. | 4" |
| Diaphragm Type | Pressure Equalizing |
| Duty Cycle | Continuous |
| For Pump Number | 10FA07P4-2W230, 10FA07S4-2W230, 10FV07P4-2W230, 10FV07S4-2W2300, 15FA07P4-2W230, 15FA07S4-2W230, 15FV07P4-2W230, 15FV07S4-2W230, 20FA07P4-2W230, 20FA07S4-2W230, 20FV07P4-2W230, 20FV07S4-2W230, 5FA07P4-2W230, 5FV07P4-2W230, 5FV07S4-2W230, 7FA05S4-2W230, 7FA07P4-2W230, 7FV07P4-2W230, 7FV07S4-2W230, Mfr No. 5FA07S4-2W230 |
| Full Load Amps | 6.8 |
| Height | 10-5/8" |
| HP | 3/4 |
| Item | Deep Well Submersible Pump Motor |
| Lead Length | 48 in |
| Max. Ambient Temp. | 86 Degrees F |
| Max. SF Amps | 8.0 |
| Motor Application | Pump |
| Motor Bearings | Thrust |
| Motor Design | Split-Phase |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Motor Service Factor | 1.5 |
| Motor Shaft Rotation | CCWSE |
| Motor Sub Application | Deep Well Submersible Pump |
| Motor Thermal Protection | Auto |
| Nameplate RPM | 3450 |
| No. of Speeds, Phase | 1 |
| Number of Wires | 2 |
| Overload Relay Max. Amp Setting | Not Applicable |
| Overload Relay Required, Starter Required, Usable @ 200V, Usable @ 208V | No |
| Shaft Material | Splined Stainless Steel |
| Standards | ANSI/NSF 61 Certified, CSA Certified, Industry Standard NEMA Mounting Dimensions, UL 778 Recognized |
| Stator Type | Hermetically Sealed |
| Thrust Rating | 300 lb |
| Voltage | 230 |
| Weight | 21 lb |