| Amps | 28/14.7-14 |
| Best Efficiency Flow | 110 gpm |
| Best Efficiency GPM @ Head | 110 @ 85 ft |
| Best Efficiency Range GPM @ Head | 73 to 135 gpm @ 100 to 65 ft |
| Compatible Discharge Pipe Size | 1 1/2 in |
| Duty, Duty Cycle | Continuous |
| Features | Back Pull Out to Reduce Maintenance Down Time, Dynamic Balancing, Renewable Wear Rings |
| Flow Rate @ 10 ft of Head (Maximum), Flow Rate @ 120 ft of Head (Maximum), Flow Rate @ 140 ft of Head (Maximum), Flow Rate @ 160 ft of Head (Maximum), Flow Rate @ 260 ft of Head (Maximum), Flow Rate @ 280 ft of Head (Maximum), Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 30 ft of Head (Maximum), Flow Rate @ 40 ft of Head (Maximum), Maximum Flow Rate | 155 gpm |
| Flow Rate @ 50 ft of Head (Maximum) | 145 gpm |
| Flow Rate @ 80 ft of Head (Maximum) | 120 gpm |
| Frame, Motor Frame Designation | 182JM |
| Frequency | 60 Hz |
| GPM of Water @ 10 Ft. of Head, GPM of Water @ 110 Ft. of Head, GPM of Water @ 120 Ft. of Head, GPM of Water @ 130 Ft. of Head, GPM of Water @ 140 Ft. of Head, GPM of Water @ 15 Ft. of Head, GPM of Water @ 160 Ft. of Head, GPM of Water @ 180 Ft. of Head, GPM of Water @ 20 Ft. of Head, GPM of Water @ 200 Ft. of Head, GPM of Water @ 220 Ft. of Head, GPM of Water @ 240 Ft. of Head, GPM of Water @ 25 Ft. of Head, GPM of Water @ 260 Ft. of Head, GPM of Water @ 280 Ft. of Head, GPM of Water @ 30 Ft. of Head, GPM of Water @ 5 Ft. of Head, Includes | - |
| GPM of Water @ 100 Ft. of Head | 70 |
| GPM of Water @ 40 Ft. of Head | 155 |
| GPM of Water @ 50 Ft. of Head | 147 |
| GPM of Water @ 60 Ft. of Head | 140 |
| GPM of Water @ 70 Ft. of Head | 130 |
| GPM of Water @ 80 Ft. of Head | 120 |
| GPM of Water @ 90 Ft. of Head | 100 |
| Height, Overall Height | 9 in |
| Housing Material, Housing Material - Pumps | Cast Iron |
| HP | 3 |
| HP - Pumps | 3 hp |
| Hz | 60 |
| Impeller Material | Bronze |
| Impeller Type | Closed |
| Inlet | 2" NPT |
| Inlet Pressure | 100 psi |
| Inlet Size - Pumps | 2 in NPT |
| Intake and Discharge Size | 2 in , 1 1/2 in |
| Intake Type | NPT |
| Item | Centrifugal Pump |
| Item - Straight Centrifugal Pumps | Straight Centrifugal High Head Pump |
| Length, Length (Straight Wireway) | 20 5/16 in |
| Manufacturers Warranty Length | 1 yr |
| Max. Case Pressure | 175 psi |
| Max. Dia. Solids | 5/16 in |
| Max. GPM @ Head | 155 @ 35 ft |
| Max. Head | 113 ft |
| Max. Liquid Temp. | 212 Degrees F |
| Max. Pressure, Max. Pressure - Pumps | 49 psi |
| Max. Specific Gravity | 1.0 |
| Maximum RPM, Motor RPM | 3,500 RPM |
| Min. GPM @ Head | 40 @ 110 ft |
| Minimum Flow Rate | 60 gpm |
| Motor Enclosure - Pumps | Open Dripproof |
| Motor Enclosure, Motor Enclosure Broad, Motor Enclosure Type | ODP |
| Motor Type | JM |
| Nameplate Voltage, Nominal Voltage | 115/208-230V AC |
| Outlet | 1-1/2" NPT |
| Outlet Size - Pumps | 1-1/2 in NPT |
| Phase, Phase - Pumps | 1 |
| Port Rotation | 90 Increments |
| Pump Housing Material Broad | CI |
| Pumping Application | Booster Service, Irrigation, Liquid Transfer, Spraying Systems, Water Circulation |
| Seal Material | Buna-N Elastomers, Carbon/Ceramic Face, 316 Stainless Steel Metal Parts |
| Seal Type | Mechanical Type 21 |
| Voltage | 115/208-230VAC |
| Voltage - Pumps | 120/208 to 240V AC |
| Wetted Materials | Stainless Steel, Carbon, Cast Iron, Bronze, Ceramic, Buna-N |
| Width | 12 1/4 in |
