| 55% Thread Drill Size | 12.50mm, 12.90mm, 14.50mm, 14.90mm, 16.20mm, 16.90mm, 18.20mm, 20.90mm, 22.50mm, 55/64 in |
| 65% Thread Drill Size | 1/2 in, 14.70mm, 20.75mm, 21/32 in, 27/32 in, 31/64 in, 45/64 in, 5/8 in, 7/8 in, 9/16 in |
| 75% Thread Drill Size | 12.00mm, 12.50mm, 14.00mm, 14.50mm, 15.50mm, 16.50mm, 17.50mm, 20.50mm, 22.00mm, 53/64 in |
| Case Type | Plastic |
| Country of Origin (subject to change) | Mexico |
| Die Hex Size | 1 7/16 in, 1 13/16 in |
| Die Material Grade | Carbon Steel |
| Die Material, Material - Machining, Tap Material | High Speed Steel |
| Die Shape | Hex |
| Die Thread Sizes Included, Tap Sizes Included | M14 x 1.25, M14 x 1.50, M14 x 2.00, M16 x 1.50, M16 x 2.00, M18 x 1.50, M18 x 2.50, M20 x 2.50, M22 x 1.50, M24 x 2.00, M24 x 3.00 |
| Drill Bit Size | 1/2 in, 11/16 in, 13/16 in, 15/32 in, 21/32 in, 35/64 in, 37/64 in, 39/64 in, 53/64 in, 7/8 in |
| Item | Tap and Die Set |
| Max. Die Thread Size, Max. Tap Thread Size | M24x3 |
| Min. Bore Dia. | 14 mm-1.25 |
| Min. Tap Thread Size | M14-1.25 |
| Number of Dies in Set, Number Of Taps | 11 |
| Number of Flutes | 4 |
| Number of Pieces | 25 |
| Tap Chamfer | Plug |
| Tap Series | Hanson |
| Tap Wrench Number | 12498 |
| Thread Direction | Right Hand |
| Thread Pitch | 1.25mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm |
| Thread Sizes Included | 14 mm-1.25, 14 mm-1.50, 14 mm-2.00, 16 mm-1.50, 16 mm-2.00, 18 mm-1.50, 18 mm-2.50, 20 mm-2.50, 22 mm-1.50, 24 mm-2.00, 24 mm-3.00 |
| Thread Standard, Thread Type | Metric |
