| Application - Valves | General Purpose |
| Body Material, Body Material - Valves, Material of Construction, Seal Material, Seal Material - Check Valves, Sub-Category | Bronze |
| Cap to Inlet Center, Overall Height | 2 in |
| Connection Type | Threaded |
| Connection Type - Check Valves | FNPT x FNPT |
| Country of Origin (subject to change) | United States |
| Cracking Pressure | 0.75 to 1 psi |
| Cracking Pressure - Check Valves | 0.750 to 1.000 psi |
| Flow | 31 gpm |
| Flow - Valves | 31.0 gpm |
| Flow Design | Single |
| Full Flow - Valves | Yes |
| Item | Low Lead Swing Check Valve |
| Item - Check Valves | Check Valve |
| Length, Length (Straight Wireway) | 3 1/4 in |
| Max. Pressure, Max. Water Pressure | 300 psi Non Shock CWP |
| Max. Steam Pressure - Valves | Not Rated |
| Max. Temp. | 200 Degrees F |
| Max. Temp. - Valves | 200 Degrees F |
| Max. Water Pressure - Valves | 300 psi @ 150 Degrees F |
| Mechanism and Body Design | Inline Swing |
| Min. Temp. - Valves | -20 Degrees F |
| Mounting Orientation, Mounting Orientation - Check Valves | Horizontal |
| Mounting Position | With Pressure Coming From Under the Disc |
| Pipe or Tube Size, Pipe or Tube Size - Check Valves, Width | 1 in |
| Pipe Size, Size | 1" |
| Seat Material, Seat Material - Check Valves | Brass |
| Standards | NSF/ANSI 372 |
