Application | Cable-to-cable |
Connection Direction | Straight |
Connector Shape | Round Model |
Contact | Copper Alloy |
Contact Resistance | Conductor resistance is 5 m? or less when a pair of contacts are connected at up to the regulation length. |
Corrosion Resistance | No functional defect was found during the JIS C 5028 salt water spray test. Contact resistance is 5 m? or less. |
Humidity Resistance | No functional defect was found during the JIS C 5023 humidity test. Insulation resistance is 100 M?. |
Impact Resistance | No functional defect was found during the JIS C 5026 shock test. Contact resistance is 5 m? or less. |
Insulation Resistance | 1,000 M? or higher when measured between immediately adjacent conductors with regulated voltage. |
Insulator | Synthetic Resin |
Operating Temperature Range | -25?C ~ +85?C |
Packing | Synthetic Rubber |
Peak Voltage | No abnormality such as short circuiting occurs when regulated voltage is applied for 1 minute between immediately adjacent conductors. |
Rated Current | Check with the table below. |
Rated Voltage | Check with the table below. |
Repeated Operation | No functional defect was found when a removal and insertion sequence was tested 500 times. Contact resistance is 5 m? or less. |
Shell | Synthetic Resin |
Temperature Cycle | No functional defect was found during the JIS C 5030 temperature cycle test. |
Vibration Resistance | No functional defect was found during the JIS C 5025 vibration test. Contact resistance is 5 m? or less. |
Waterproofing | No abnormality such as flooding was found when left under water pressure of 0.4 kgf/cm2 at regular working conditions for 24 hours or more. |