mpn:
brand:
manufacturer:
MPN:
Description:
Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 3/4 In.-10, Overall Length 4 1/4 in, Thread Length 2 3/8 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4 in, Minimum Installation Depth 3 3/8 in, Minimum Material Thickness 6 in, Ultimate Shear Strength (4,000 psi Concrete) 15,126 lb, Ultimate Tension Strength (4,000 psi Concrete) 11,975 lb, Nut Width 1.125 in
Attributes
| Key | Value |
|---|---|
| Anchor Diameter | 3/4" |
| Compatible Material | Concrete |
| Embedment In Concrete | 3 3/8 in |
| Finish | Zinc Plated |
| Includes | Nut and Washer |
| Industry Standards | GSA SPEC FF-S-325C, GROUP II, TYPE 4, CLASS 1 |
| Item | Wedge Anchor |
| Material | Steel |
| Material Grade | Grade 2 |
| Maximum Material Thickness | 7/8" |
| Minimum Installation Depth | 3-3/8" |
| Overall Length | 4-1/4" |
| Seismic Approved | No |
| Sub-Brand | SUP-R-STUD + |
| Thread Length | 2 3/8 in |
| Thread Size | 3/4"-10 |
| Ultimate Pullout (Lb.) | 11,975 lb |
| Ultimate Shear (Lb.) | 15,126 lb |
| Ultimate Shear in 3000 PSI Concrete (Lb.) | 15,126 lb |
| Ultimate Tension (Lbs.) | 11,975 lb |
| Ultimate Tension in 3000 PSI Concrete (Lb.) | 9,267 lb |