| Chamfer Width | 0.010 in |
| Coolant Fed | Non-Coolant Through |
| Corner Radius | .020 in |
| Country of Origin (subject to change) | United States |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing/Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Corner Radius |
| Finish | Bright (Uncoated) |
| Finish - Machining | nACRo |
| Flute Type | Spiral |
| For Material Hardness | Less Than240- Greater Than240HB, Less Than28-65Rc |
| Grade | Carbide |
| Helix Angle | 40 Degrees |
| Item | Corner Radius End Mill |
| Length of Cut | 1/4 in |
| List Number | 295 |
| Material - Machining | Carbide |
| Material Applications | Cast Iron, Stainless Steel, Steel, Super Alloy |
| Material Grade - Machining | C2 Micrograin |
| Max. Helix Angle | 40 Degrees |
| Measurement System | Fractional Inch |
| Milling Dia. | 1/8 in |
| Min. Helix Angle | 40 Degrees |
| Neck Dia. | 0.0000 in |
| Neck Length | 0.0000 in |
| Number of Coolant Holes | 0 |
| Number of Flutes | 5 |
| Overall Length | 2 1/2 in |
| Primary Material Application | Nickel, Stainless Steel, Titanium |
| Primary Material Application ISO Code | M, S |
| Secondary Material Application | Alloy Steel |
| Secondary Material Application ISO Code | K, M, P |
| Series | Alpha |
| Shank Dia. | 1/8 in |
| Shank Type - Machining | Straight |
| Single End/Double End | Single End |
| Spiral Direction | Right Hand |
