NIBCO 9059356HPC

<p>The NIBCO? Press System copper 90-degree fitting elbow features an inboard bead and yellow HNBR O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, robust seal in seconds with no flame, solder or flux. The elbow has a male fitting end and a press connection. The fitting provides a method of changing the pipeline direction by 90 degrees between a press connection and fitting connection which can either be soldered or pressed. NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO? PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO? PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. </p> <p><strong>Features: </strong> </p> <ul><li>Operating pressure 200 PSI max, (125 PSI for natural gas applications) depending on the application. </li> <li>Temperature range -40?F to 180?F </li> <li>ASTM B75 Alloy C12200 Copper </li> <li>IFGC International Fuel Gas Code </li> <li>NFPA 54/Z223.1 National Fuel Gas Code </li> <li>NFPA 58 Liquified Petroleum Gas Code </li> <li>UPC Chapter 12 Fuel Piping </li> <li>NFPA30 Flammable and Combustible Liquids Code </li> <li>NFPA30A Code for Motor Fuel Dispensing Facilities and Repair Garages </li> <li>NFPA 31 Standard for the Installation of Oil Burning Equipment (supply line only) </li> <li>Third Party Certified to ANSI LC4/CSA 6.32 </li> <li>Third Party Certifiefd to IAPMO/UPC LCL-4 </li> <li>ICC-ES PMG 1036 </li> </ul>