| 55% Thread Drill Size | 11.30 mm |
| 65% Thread Drill Size | 11.00 mm |
| 75% Thread Drill Size | 0.4219 |
| Class of Fit, Thread Limit | 2B |
| Coolant Fed | Non-Coolant Through |
| Country of Origin (subject to change) | Japan |
| Cutting Direction - Machining, Thread Direction | Right Hand |
| Drill Bit Size | 0.4201 in, 0.4251 in, 0.4301 in, 0.4351 in, 0.4400 in |
| Extended Neck | Yes |
| Helix Angle | 45 Degrees |
| Item | Spiral Flute Tap |
| List Number, Material Grade - Machining, Series | 13015 |
| Measurement System | Fractional Inch |
| Number of Flutes | 3 |
| Number of Pieces | 1 |
| Overall Length | 110.00mm |
| Pitch Diameter Limit | Not Rated |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application ISO Code | K, P |
| Secondary Material Application | Stainless Steel |
| Secondary Material Application ISO Code | M |
| Shank Dia. | 0.367" |
| Shank Length | 3 11/16 in |
| Shank Type - Machining | Straight |
| Shop By | Closeouts |
| Square Size | 0.2740 in |
| Tap Chamfer | Modified Bottoming |
| Tap Dimension Type | Inch |
| Tap Finish | Oxide |
| Tap Grouping | Tap |
| Tap Length Standard | DIN |
| Tap Material | High Speed Steel |
| Tap Shank Standard | ANSI |
| Tap Size | 1/2" |
| Tap Style | Spiral Flute |
| Tap Thread Size, Thread Size | 1/2"-13 |
| Tap Thread Type, Thread Standard | UNC |
| Thread Length | 1-21/32" |
| Thread Limit / Class of Fit | 2B / 2B |
| Threads per Inch | 13 |
