- mpnP30SS4P150
- brandname: Plastec
- manufacturername: Plastec
Attributes
| Key | Value |
|---|
| Agency Compliance | AMCA and CSA certified,. |
| Airflow @ 1.250 in SP | 800 cfm |
| Airflow @ 1.500 in SP | 800 cfm |
| Airflow @ 1.500 in SP R. | 0 to 999 cfm |
| Airflow @ Static Pressu. | 800 cfm @ 1.500 in SP |
| Assembly | Fully Assembled |
| Bearing Type | Ball, Ball Bearing, Sea. |
| Blower RPM | 1,725 RPM |
| CFM @ 1.250-In. SP | 800 |
| CFM @ 1.500-In. SP | 800 |
| Corrosion Resistant | Yes |
| Country of Origin (subj. | United States |
| Current | 12.8/6.38 A |
| dBA @ 5 Feet | 54 dBA |
| Depth (In.) | 22.23 in |
| Discharge Position | Bottom Horizontal, Down. |
| Drive Type | Direct Drive |
| Flange Size | Not Applicable |
| Flange Type | Non-Flanged |
| Flange Type_broad | Outlet |
| For Air Type | Contaminated, Damp, Dir. |
| For Fan Speed (Dependen. | 1,725 RPM to 1,725 RPM |
| Frequency | 60 Hz |
| Full Load Amps | 12.8/6.38 |
| Height (In.) | 36.05 in |
| Housing Finish | Polypropylene |
| Housing Height | 36 in |
| Housing Material | Polypropylene |
| Housing Width | 22 1/4 in |
| Hz | 60 Hz |
| Includes | Motor Mounting Base |
| Includes Drive Package | Yes |
| Includes Motor | Yes |
| Includes Mounting Hardw. | Yes |
| Inlet Dia. (In.) | 10.75 in |
| Inlet Diameter | 10 3/4 in |
| Inlet Type | Single-Inlet |
| Item | Plastec Blower |
| Material | Plastic Wheel & Plastic. |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Max. Inlet Temp. (Deg. . | 140 Degrees F |
| Maximum Ambient Tempera. | -13 Degrees F |
| Maximum Fan Speed | 1,725 RPM |
| Maximum Inlet Air Tempe. | 140 Degrees F |
| Maximum Static Pressure | 3 1/4 in wc |
| Minimum Ambient Tempera. | -40 Degrees C |
| Minimum Fan Speed | 1,725 RPM |
| Motor Enclosure | Totally Enclosed Fan Co. |
| Motor Enclosure Design | Totally Enclosed Fan-Co. |
| Motor Enclosure Design_. | Totally Enclosed Motor |
| Motor Frame | 90 |
| Motor Frame Designation | 90 |
| Motor Horsepower | 1 1/2 hp |
| Motor HP | 1 1/2 hp |
| Motor RPM | 1,725 RPM |
| Motor Speed | 1,725 RPM |
| Motor Type | General Duty, Single Ph. |
| Mount Type | Motor Mount |
| Mounting Orientation | Multiposition |
| Nameplate Voltage | 115/230V AC |
| Nominal Voltage | 115/230V AC |
| Number of Discharge Pos. | 2 |
| Number of Inlets | 1 |
| Outlet Dia. (In.) | 10.75 in |
| Outlet Diameter | 10 3/4 in |
| Outlet Height | Not Applicable |
| Outlet Shape | Round |
| Outlet Shape_broad | Round |
| Outlet Size | 10 3/4 in diameter |
| Outlet Width | Not Applicable |
| Overall Depth | 22 1/8 in |
| Overall Height | 36 in |
| Overall Width | 22 1/4 in |
| Phase | 1 |
| Product Type | Plastec Blower |
| Rotation | CCW |
| Shaft Dia. (In.) | 24 mm |
| Shaft Diameter | 24 mm |
| Sound Level | 54 dBA @ 5 ft |
| Standards | AMCA Certified, CSA Cer. |
| Thermal Overload Protec. | Yes |
| Type | Direct Drive Forward Cu. |
| Voltage | 115/230 |
| Wheel Dia. (In.) | 11.875 in |
| Wheel Diameter | 11 7/8 in |
| Wheel Dimensions | 11 7/8 in Dia. x 6 1/2 . |
| Wheel Material | Polypropylene |
| Wheel Type | Forward Curve |
| Wheel Width | 6 1/2 in |
| Wheel Width (In.) | 6.5 in |
| Width (In.) | 22.25 in |