brand:
manufacturer:
Description:
The WNMG 432W-MR:T5315 is produced by Pramet and is described as a Pramet WNMG 432W-MR:T5315 6850893 Turning Insert - Negative
Attributes
| Key ^ | Value |
|---|---|
| Chipbreaker | W-MR |
| Coating | T5315 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE), Depth of cut minimum - inch (APMN) | 0.031 |
| Corner radius - millimeter (RE), Depth of cut minimum - millimeter (APMN) | 0.8 |
| Cutting edge length - inch (L) | 0.343 |
| Cutting edge length - millimeter (L) | 8.7 |
| Depth of cut maximum - inch (APMX) | 0.157 |
| Depth of cut maximum - millimeter (APMX) | 4 |
| Feed maximal - millimeter | 0.7 |
| Feed minimal - millimeter | 0.2 |
| Feed_MAX_IMP_NUM | 0.028 |
| Feed_MIN_IMP_NUM | 0.008 |
| Fixing hole diameter - inch (D1) | 0.203 |
| Fixing hole diameter - millimeter (D1) | 5.16 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert thickness - millimeter (S) | 4.76 |