mpn:
brand:
manufacturer:
MPN:
Description:
Ruland part number BCK32-16-14-A is an aluminum bellows coupling with 1" x 7/8" bores with keyways. Download a 2D/3D CAD file or purchase the BCK32-16-14-A directly from the manufacturer.
Attributes
| Key ^ | Value |
|---|---|
| Angular Misalignment | 2.0? |
| Axial Motion | 0.020 in |
| B1 Max Shaft Penetration, B2 Max Shaft Penetration | 1.099 in |
| Balanced Design, Full Bearing Support Required?, Zero-Backlash? | Yes |
| Bellows Attachment Method | Epoxy |
| Bore (B1) | 1.0000 in |
| Bore Tolerance | +0.001 in / -0.000 in |
| Country of Origin | USA |
| Dynamic Torque Non-Reversing | 200 lb-in |
| Dynamic Torque Reversing | 100 lb-in |
| Finish Specification | Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize |
| Forged Clamp Screw | M5 |
| Hex Wrench Size | 4.0 mm |
| Hub Width (LH) | 0.810 in |
| Keyway (K1) | 1/4 in |
| Keyway (K2) | 3/16 in |
| Length (L) | 2.413 in |
| Length Tolerance | +/- 0.030 in |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminum Bar |
| Maximum Speed | 10,000 RPM |
| Moment of Inertia | 0.2688 lb-in |
| Note 1 | Stainless steel hubs are available upon request. |
| Note 2 | Torque ratings are at maximum misalignment. |
| Note 3 | Performance ratings are for guidance only. The user must determine suitability for a particular application. |
| Note 4 | Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. Please consult technical support for more assistance. |
| Number of Screws | 2 ea |
| Outer Diameter (OD) | 2.000 in |
| Parallel Misalignment | 0.010 in |
| Recommended Shaft Tolerance | +0.0000 in / -0.0005 in |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 9.5 Nm |
| Small Bore (B2) | 0.8750 in |
| Static Torque | 400 lb-in |
| Tariff Code | 8483.60.8000 |
| Temperature | -40?F to 200?F (-40?C to 93?C) |
| Torsional Stiffness | 950 lb-in/Deg |
| UNSPC | 31163018 |
| UPC | 634529167038 |
| Weight (lbs) | 0.419000 |