- mpnDCS21-11MM-3/8"-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 1.0? |
| Axial Motion | 0.008 in, 0.20 mm |
| B1 Shaft Penetration | 0.842 in, 21.4 mm |
| B2 Shaft Penetration | 0.842 in, 21.4 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 50 lb-in, 5.65 Nm |
| Dynamic Torque Reversing | 25 lb-in, 2.83 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Clamp Screw | M3 |
| Hex Wrench Size | 2.5 mm |
| Hub Width LH | 0.590 in, 15.0 mm |
| Large Bore B1 | 11 mm |
| Length L | 1.313 in / 33.3 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminu. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 2 ea |
| Outer Diameter OD | 1.313 in, 33.3 mm |
| Parallel Misalignment | 0.00 in, 0.00 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 2.1 Nm |
| Small Bore B2 | 0.375 in |
| Static Torque | 100 lb-in, 11.3 Nm |
| Temperature | -10?F to 200?F |
| Torsional Stiffness | 313 lb-in/Deg, 35.4 Nm/. |
| UPC | 63452915063 |
| Weight (lbs.) | 0.1650 |