mpn:
brand:
manufacturer:
MPN:
Description:
Ruland part number DSD26-10-10-A is an aluminum double disc coupling with 5/8" x 5/8" bores. Download a 2D/3D CAD file or purchase the DSD26-10-10-A directly from the manufacturer.
Attributes
| Key ^ | Value |
|---|---|
| Angular Misalignment | 2.0? |
| Axial Motion | 0.020 in |
| B1 Max Shaft Penetration, B2 Max Shaft Penetration | 1.029 in |
| Bore (B1), Small Bore (B2) | 0.6250 in |
| Bore Tolerance | +0.001 in / -0.000 in |
| Country of Origin | USA |
| Dynamic Torque Non-Reversing | 90 lb-in |
| Dynamic Torque Reversing | 45 lb-in |
| Finish Specification | Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize |
| Forged Set Screw | M5 |
| Full Bearing Support Required? | Yes |
| Hex Wrench Size | 2.5 mm |
| Hub Width (LH) | 0.710 in |
| Length (L) | 2.165 in |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs and Center Spacer: 2024-T351 Aluminum Bar |
| Maximum Speed | 10,000 RPM |
| Note 1 | This product has been discontinued as a standard item. Please inquire for special pricing. |
| Note 2 | Torque ratings are at maximum misalignment. |
| Note 3 | Performance ratings are for guidance only. The user must determine suitability for a particular application. |
| Note 4 | Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |
| Number of Screws | 4 ea |
| Outer Diameter (OD) | 1.625 in |
| Parallel Misalignment | 0.010 in |
| Recommended Shaft Tolerance | +0.0000 in / -0.0005 in |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 4 Nm |
| Static Torque | 180 lb-in |
| Tariff Code | 8483.60.8000 |
| Temperature | -40?F to 200?F (-40?C to 93?C) |
| Torsional Stiffness | 375 lb-in/Deg |
| UNSPC | 31163008 |
| UPC | 634529082942 |
| Weight (lbs) | 0.353100 |