- mpnDSS36-1 1/4"-19MM-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 1.0? |
| Axial Motion | 0.015 in, 0.38 mm |
| B1 Shaft Penetration | 1.050 in, 26.7 mm |
| B2 Shaft Penetration | 1.085 in, 27.6 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 225 lb-in, 25.45 Nm |
| Dynamic Torque Reversing | 112.5 lb-in, 12.73 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Set Screw | M8 |
| Hex Wrench Size | 4.0 mm |
| Hub Width LH | 1.050 in, 26.7 mm |
| Large Bore B1 | 1.250 in |
| Length L | 2.313 in / 58.8 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminu. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 4 ea |
| Outer Diameter OD | 2.250 in, 57.2 mm |
| Parallel Misalignment | 0.00 in, 0.00 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 17 Nm |
| Small Bore B2 | 19 mm |
| Static Torque | 450 lb-in, 50.9 Nm |
| Temperature | -10?F to 200?F |
| Torsional Stiffness | 1000 lb-in/Deg, 113.0 N. |
| UPC | 63452916260 |
| Weight (lbs.) | 0.4050 |