- mpnDSSK32-20MM-3/4"-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 1.0? |
| Axial Motion | 0.012 in, 0.30 mm |
| B1 Shaft Penetration | 0.874 in, 22.2 mm |
| B2 Shaft Penetration | 0.874 in, 22.2 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 175 lb-in, 19.80 Nm |
| Dynamic Torque Reversing | 87.5 lb-in, 9.90 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Set Screw | M6 |
| Hex Wrench Size | 3.0 mm |
| Hub Width LH | 0.810 in, 20.6 mm |
| Keyway K1 | 6 mm |
| Keyway K2 | 3/16 in |
| Large Bore B1 | 20 mm |
| Length L | 1.813 in / 46.1 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminu. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 4 ea |
| Outer Diameter OD | 2.000 in, 50.8 mm |
| Parallel Misalignment | 0.00 in, 0.00 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 7.2 Nm |
| Small Bore B2 | 0.750 in |
| Static Torque | 350 lb-in, 39.6 Nm |
| Temperature | -10?F to 200?F |
| Torsional Stiffness | 867 lb-in/Deg, 98.0 Nm/. |
| UPC | 63452918254 |
| Weight (lbs.) | 0.4400 |