mpn:
brand:
manufacturer:
MPN:
Weight:
0.01875
Weight:
0.01875 LB
Preferred Price:
206.97
Price:
206.97
Min Simple Price:
117.0
Absolute Min Price:
166.02
Min Price:
166.02
Dimensions:
[6.0, 2.0, 2.0]
qty:
21
simpleSku:
TA0MTg:::MBC41-20-20-A
sku:
TA0MTg::KK:MBC41-20-20-A@y0
condition:
11
seller:
Zoro
amzMan:
ruland manufacturing co., inc.
HazMat:
False
DropShip:
False
Attributes
| Key ^ | Value |
|---|---|
| Angular Misalignment | 2.0? |
| Axial Motion, axial motion: | 0.50 mm |
| B1 Max Shaft Penetration, B2 Max Shaft Penetration | 24.0 mm |
| Balanced Design, Full Bearing Support Required?, Zero-Backlash? | Yes |
| Bellows Attachment Method | Epoxy |
| bellows material: | 321 Stainless Steel |
| Bore (B1), bore - side 1:, bore - side 2:, Small Bore (B2) | 20 mm |
| Bore Dia. | 20mm x 20mm |
| Bore Tolerance | +0.03 mm / -0.00 mm |
| bore tolerance: | +.03 / -.00 mm |
| Category | Hardware, Fasteners, Accessories |
| Clearance Dia. (mm) | 41.0 |
| Country of Origin | USA |
| Country of Origin (subject to change) | United States |
| coupling style: | Clamp-On |
| Description | 20MMX20MM BELLOWS COUPLING |
| Digi-Key Part Number | 3188-MBC41-20-20-A-ND |
| Dynamic Torque Non-Reversing | 14.00 Nm |
| dynamic torque non-reversing: | 14.00 N-m |
| Dynamic Torque Reversing | 7.00 Nm |
| dynamic torque reversing: | 7.00 N-m |
| Finish | Anodized Aluminum |
| Finish Specification | Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize |
| Forged Clamp Screw, Screw Size, Screw Size (mm), screw thread size: | M4 |
| harmonization code: | 8483608000 |
| Hex Wrench Size | 3.0 mm |
| Hub Dia., Outside Dia. | 41 mm |
| hub material: | 7075 or 2024 Aluminum |
| Hub Width (LH) | 18.05 mm |
| Item, Item - Motion Control Couplings | Motion Control Coupling |
| Length (L) | 51.7 mm |
| Length through Bore | 25.5 mm |
| Length through Bore (mm) | 25.50 |
| length through bore:, Overall Length, overall length: | 50.8 mm |
| Length Tolerance | +/- 0.76 mm |
| Manufacturer Product Number | MBC41-20-20-A |
| Manufacturer, Mfr | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminum Bar |
| Material, Material - Couplings | Aluminum |
| Max. Angular Misalignment | 2 Degrees |
| Max. Axial Misalignment (In.) | +/-0.020 |
| Max. Parallel Misalignment (In.) | 0.01 in |
| Max. RPM, Maximum Speed | 10,000 RPM |
| Max. Temp. | 200 Degrees F |
| Max. Temp. Range (F) | 200 |
| maximum angular misalignment: | 2.00 |
| maximum parallel misalignment:, Parallel Misalignment | 0.25 mm |
| maximum rpm: | 10000 rpm |
| Moment of Inertia | 29.689 x10 |
| Note 1 | Stainless steel hubs are available upon request. |
| Note 2 | Torque ratings are at maximum misalignment. |
| Note 3 | Performance ratings are for guidance only. The user must determine suitability for a particular application. |
| Note 4 | Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the metal bellows. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |
| Number of Screws | 2 ea |
| Outer Diameter (OD), outside diameter: | 41.3 mm |
| Outside Dia. (mm) | 41 |
| Overall Length (In.), Series, Size | - |
| Overall Length (mm) | 51 |
| Package | Bag |
| Product Status | Active |
| rated temperature: | -40 to 200 |
| Rated Torque | 250 in-lb |
| Recommended Shaft Tolerance | +0.000 mm / -0.013 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Screw Type | Cap Screw |
| Seating Torque | 4.6 Nm |
| series: | MBC |
| Shaft Locking Type - Couplings | 1 Piece Clamp |
| shaft penetration: | 25.4 mm |
| Specifications | 1.625" (41.28mm) Outer Diameter x 2.000" (50.80mm) Length |
| Static Torque | 28.0 Nm |
| static torque: | 28.0 N-m |
| Style | Bellows Clamp |
| Tariff Code | 8483.60.8000 |
| Temperature | -40?F to 200?F (-40?C to 93?C) |
| Torque (In.-Lbs.) | 250 |
| Torsional Stiffness | 63 Nm/Deg |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.002 |
| torsional stiffness: | 63 N-m/deg |
| Type | Bellows Coupling |
| UNSPC | 31163018 |
| UPC | 634529064245 |
| UPC Code | 63452906424 |
| Weight (lbs) | 0.252800 |
| weight: | 0.305 lb |
All Prices
| Img | Seller | Supplier SKU | Requested Price ^ | Calc MOQ Price | MOQ | In Stock | Lead Time | Brand | Weight | Preferred Tier |
|---|---|---|---|---|---|---|---|---|---|---|
 | Zoro | G3083376 | 117.0 | 117.0 | 1 | In Stock | 15 | Ruland | 0.3 | 117.0 @ Qty: 1+ |
| us.rs-online.com | 72177114 | 130.38 | 130.38 | 1 | In Stock | Ruland Manufacturing | 130.38 @ Qty: 1+ | |||
 | cbtcompany.com | MBC41-20-20-A | 130.79 | 130.79 | 1 | In Stock | RULAND MANUFACTURING | 130.79 @ Qty: 1+ | ||
 | motionindustries.com | 02336944 | 146.03 | 146.03 | 1 | In Stock | Ruland Manufacturing Co Inc | 146.03 @ Qty: 1+ | ||
 | Ruland | MBC41-20-20-A | 150.06 | 150.06 | 1 | In Stock | Ruland | 0.2528 | 150.06 @ Qty: 1+ | |
| RS Delivers | 174-7189 | 150.348 | 150.348 | 1 | 5 | Ruland | 150.348 @ Qty: 1+ | |||
| AmazonTP | B016APPNKK | 181.92 | 181.92 | 1 | In Stock | 5 | Ruland Manufacturing Co., Inc. | 181.92 @ Qty: 1+ | ||
 | Digi-Key | 13601763 | 220.58 | 220.58 | 1 | 9 | Ruland Manufacturing | 220.58 @ Qty: 1+ | ||
 | Raptor Supplies | AB9BGH | 249.1578765 | 249.1578765 | 1 | In Stock | RULAND MANUFACTURING | 249.1578765 @ Qty: 1+ |
