mpn:
brand:
manufacturer:
MPN:
Weight:
272.16
Weight:
272.16 LB
Preferred Price:
263.92
Price:
263.92
Min Simple Price:
149.11
Absolute Min Price:
211.73
Min Price:
211.73
Dimensions:
[6.0, 4.0, 2.0]
qty:
21
simpleSku:
TA0MTg:::PSMR32-11-11-SS
sku:
TA0MTg::OE:PSMR32-11-11-SS@y0
condition:
11
seller:
Zoro
amzMan:
ruland manufacturing co., inc.
HazMat:
False
DropShip:
True
Attributes
| Key ^ | Value |
|---|---|
| Angular Misalignment | 3.0? |
| Axial Motion | 0.25 mm |
| B1 Max Shaft Penetration, B2 Max Shaft Penetration | 17.6 mm |
| Bore (B1), bore - side 1:, bore - side 2:, Max. Bore (mm), Small Bore (B2) | 11 mm |
| Bore Dia. | 11mm x 11mm |
| Bore Tolerance | +0.025 mm / -0.000 mm |
| bore tolerance: | +.025 / -.000 mm |
| Category | Hardware, Fasteners, Accessories |
| Clearance Dia. (In.) | 1.125 in |
| Clearance Dia. (mm) | 28.6 |
| Country of Origin | USA |
| Country of Origin (subject to change) | United States |
| Dynamic Torque Non-Reversing | 3.96 Nm |
| Dynamic Torque Reversing | 1.98 Nm |
| Finish | Bright |
| Finish Specification | Bright, No Plating |
| Forged Set Screw, Screw Size, Screw Size (mm), screw thread size: | M6 |
| Full Bearing Support Required?, Zero-Backlash? | Yes |
| harmonization code: | 8483608000 |
| Hex Wrench Size | 3.0 mm |
| Item, Item - Motion Control Couplings | Motion Control Coupling |
| Length (L), Overall Length, overall length: | 38.1 mm |
| Length through Bore | 17.02 mm |
| Length through Bore (In.) | 0.67 |
| Length through Bore (mm) | 17.02 |
| Manufacturer, Mfr | Ruland Manufacturing |
| Material Specification | Type 303 Austenitic, Non-Magnetic Bar |
| Material, Material - Couplings | Stainless Steel |
| material: | 303 Stainless Steel |
| Max. Angular Misalignment | 3 Degrees |
| Max. Axial Misalignment (In.) | +/-0.01 |
| Max. Parallel Misalignment (In.) | 0.015 in |
| Max. RPM, Maximum Speed | 6,000 RPM |
| Max. Temp. | 350 Degrees F |
| Max. Temp. Range (F) | 350 Degrees |
| maximum angular misalignment: | 3 |
| maximum parallel misalignment:, Parallel Misalignment | 0.38 mm |
| maximum rpm: | 6000 rpm |
| Min. Bore (mm) | 11 |
| Moment of Inertia | 26.977 x10 |
| Note 1 | Torque ratings are at maximum misalignment. |
| Note 2 | Performance ratings are for guidance only. The user must determine suitability for a particular application. |
| Note 3 | Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance. |
| number of beams: | Four Beam |
| Number of Screws | 4 ea |
| operating temperature: | -40 to +350 |
| Outer Diameter (OD), Outside Dia., Outside Dia. (mm), outside diameter: | 31.8 mm |
| Outside Dia. (In.) | 1.25 |
| Overall Length (In.) | 1.5 |
| Overall Length (mm) | 38.1 |
| Package | Bag |
| Product Status | Active |
| Rated Torque | 70 in-lb |
| Recommended Shaft Tolerance | +0.000 mm / -0.013 mm |
| screw clamp type: | Set Screw Type |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Screw Type | Set Screw |
| Seating Torque | 7.2 Nm |
| Series | - |
| Setscrew Location | 2 (120 Degrees ) |
| Shaft Locking Type - Couplings | 1 Piece Set Screw |
| Size | PSMR32 |
| Specifications | 1.250" (31.80mm) Outer Diameter x 1.500" (38.10mm) Length |
| Static Torque | 7.91 Nm |
| Style | 4-Beam Set Screw |
| Tariff Code | 8483.60.8000 |
| Temperature | -40?F to 350?F (-40?C to 176?C) |
| Torque (In.-Lbs.) | 70 |
| Torsional Stiffness | 0.57 Deg/Nm |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.064 |
| torsional stiffness: | 0.57 in-lb/deg |
| Type | Beam Coupling |
| UNSPC | 31163003 |
| UPC | 634529050798 |
| Weight (lbs) | 0.409900 |
| weight: | 0.597 lb |
All Prices
| Img | Seller | Supplier SKU | Requested Price ^ | Calc MOQ Price | MOQ | In Stock | Lead Time | Brand | Weight | Preferred Tier |
|---|---|---|---|---|---|---|---|---|---|---|
 | Zoro | G8234895 | 149.11 | 149.11 | 1 | In Stock | 10 | Ruland | 0.55 | 149.11 @ Qty: 1+ |
 | cbtcompany.com | PSMR32-11-11-SS | 168.0 | 168.0 | 1 | In Stock | RULAND MANUFACTURING | 168.0 @ Qty: 1+ | ||
 | motionindustries.com | 04806152 | 168.76 | 168.76 | 1 | In Stock | Ruland Manufacturing Co Inc | 168.76 @ Qty: 1+ | ||
 | sustainablesupply.com | C1645701 | 174.21 | 174.21 | 1 | In Stock | Ruland Manufacturing | 0.55 | 174.21 @ Qty: 1+ | |
 | Ruland | PSMR32-11-11-SS | 192.75 | 192.75 | 1 | In Stock | Ruland | 0.4099 | 192.75 @ Qty: 1+ | |
| Grainger | 30VD68 | 253.5 | 253.5 | 1 | In Stock | 10 | RULAND MANUFACTURING | 253.5 @ Qty: 1+ | ||
| Digi-Key | 13605859 | 255.39 | 255.39 | 1 | In Stock | Ruland Manufacturing | 255.39 @ Qty: 1+ | |||
 | Raptor Supplies | AF9VYD | 368.6249385 | 368.6249385 | 1 | In Stock | RULAND MANUFACTURING | 368.6249385 @ Qty: 1+ |
