| Alignment Between | 381 lbs. (Table Saw Only) |
| Amperage | 14A |
| Arbor | 5/8 in. |
| Arbor Diameter at Blade | 10-1/4 in. |
| Arbor Runout | 7 in. Diameter Cast Iron |
| Blade Diameter | 10 in. |
| Blade Lateral Movement | 85-1/4 in. |
| Blade Thicknesss | 0.078 in. |
| Blade Tilt and Kerf | Left / 0.018 in. |
| Brand | Saw Stop |
| Cabinet Footprint (W x D) | 19-3/8 in. x 19-3/8 in. |
| Cast Iron Table (W x D) | 20 in. x 27 in. |
| Dado Diamter | 62mm OD x 30mm ID |
| Dado Max. Width | 52mm OD x 25mm ID |
| Deviation of Miter Gauge | 34-3/4 in. |
| Horsepower | 1.75 Hp |
| Main Bearing Size | 7-1/2 in. |
| Max Depth of Cut | 13/16 in., 8 in. |
| Max. Rip Left of Blade | 5/8 in. |
| Max. Rip Right of Blade | 52 in. |
| Phase | Single |
| Second Bearing Size | 0.001 in. Max. Allowable Runout |
| Sku | CNS175-TGP252 |
| Stamped Steel | 12 in. |
| Table Behind Blade | 0.078 in. |
| Table Flatness Measured | 45 in. |
| Table in Front of Blade | 3/4 in. at Top |
| Voltage | 110V |
