| [Uc] Control Circuit Voltage, Voltage Rating | 110 V - 15...10 % 50/60 Hz |
| [Us] Rated Supply Voltage | 208...600 V - 15...10 % |
| Ambient Air Temperature For Operation | -10-40 ?C without derating) || 40-60 ?C with current derating 2.2 % per ?C) |
| Ambient Air Temperature For Storage | -25-70 ?C |
| Application | Fans, Pumps |
| Application, Product Destination | asynchronous motors |
| Assembly Style | with heat sink |
| Brand, Manufacturer, Mfr | Schneider Electric |
| California Proposition 65 : WARNING: This product can expose you to chemicals including | Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Catalog Number, Item Number | ATS22C25S6U |
| Category | Motors, Actuators, Solenoids and Drivers |
| China Rohs Regulation | X |
| Circularity Profile | ENVEOLI110805EN |
| Communication Data Link | serial |
| Communication Port, Communication Port Protocol | Modbus |
| Component Name, Series | ATS22 |
| Connection, Device Connection | in the motor supply line |
| Connector Type | 1 RJ45 |
| Control / Drive Type | Soft Start / Stop |
| Control Circuit Consumption | 20 W |
| Control Voltage | 110 |
| Country of Origin | CN - China, China |
| Current - Output | 250A |
| Current Rating, Output Current | 250 A |
| Depth | 299 mm, 11.8 in |
| Discrete Input Number, Input Phase | 3 |
| Discrete Input Type | LI1, LI2, LI3) logic, 5 mA 20 kOhm |
| Discrete Output Number | 2 |
| Discrete Output Type | relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
| Display | 4 7-Segment Display, 4 LED (Ready, Communication, Run and Trip) |
| ECCN | EAR99 |
| Electromagnetic Compatibility | conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 || voltage/current impulse level 3 IEC 61000-4-5 |
| Enclosure Rating | IP00, NEMA 1 |
| Environmental Disclosure | ENVPEP100402EN |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Factory Setting Current | 240 A |
| Family Series | Square D Miscellaneous |
| Features, For Use With/Related Products, Weight | - |
| Function Available, Special Features | internal bypass |
| Gross Weight, Net Weight | 0 lbs |
| GTIN | 03606480211201 |
| Height | 15.6 in, 425 mm |
| Horse Power | 250 |
| HP @ 3 Phase - 208V | 75 hp |
| HP @ 3 Phase - 240V | 100 hp |
| HP @ 3 Phase - 480V | 200 |
| HP @ 3 Phase - 575V | 250 hp |
| Icl Starter Rating | 250 A connection in the motor supply line for standard applications |
| Input Voltage, Output Voltage | 208 to 600V AC |
| Inputs/Outputs | 3 Logic Inputs, 1 PTC Probe Analog Input, 2 (NC/NO) Relay Outputs |
| Installed Device | 31 |
| Interface | RS-485, Serial |
| Ip Degree Of Protection, Standard | IP00 |
| Item | Soft Start |
| Item Type | Soft starter;1 RJ45 |
| Made in USA | No |
| Manufacturer | Square D |
| Manufacturer Part Number | 605336 |
| Marking | CE |
| Maximum Horse Power Rating | 100 hp 230 V || 200 hp 460 V || 250 hp 575 V || 75 hp 208 V |
| Maximum Switching Current | 5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs |
| Mercury Free, Rohs Exemption Information | Yes |
| Minimum Switching Current | 100 mA 12 V DC relay outputs) |
| Motor Type | AC Motor |
| Mounting Type | Chassis Mount |
| Net Weight | 33 kg |
| Network Frequency | 45...66 Hz |
| Noise Level | 56 dB |
| Number of Motors | 1 |
| Operating Position | vertical +/- 10 degree |
| Operating Temperature | -10?C ~ 60?C |
| Output Current | 0.4...1 Icl adjustable |
| Overall Depth, Overall Width | 8.11 in |
| Overall Height | 16.73 in |
| Package | Box |
| Phase | 3 phase |
| Physical Interface | RS485 multidrop |
| Pollution Degree | level 2 IEC 60664-1 |
| Power Dissipation In W | 129 W for standard applications |
| Power Supply | 208...600 V - 15...10 ,50...60 HZ - 10...10 |
| Product Certifications | C-tick || CSA || GOST || UL || CCC |
| Product Or Component Type | soft starter |
| Product Specific Application | pumps and fans |
| Product Status | Active |
| Protection Type | phase failure line || thermal protection motor || thermal protection starter |
| Ptc Probe Input | 750 Ohm |
| Ramp Time | 1 to 60 sec. |
| Range Of Product, Series, Sub Brand | Altistart 22 |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| Relative Humidity | 0-95 % without condensation or dripping water EN/IEC 60068-2-3 |
| Series | Altistart ATS 22 Series |
| Shock Resistance | 15 gn 11 ms EN/IEC 60068-2-27 |
| Standards | C-tick, CCC, CSA Certified, EN/IEC 60947-4-2, GOST, UL Listed, EN/IEC 60947-4-2 |
| Start Type | Torque Control Start |
| Stop Time | 1 to 60 sec |
| Supply Frequency | 50...60 Hz - 10...10 % |
| Supply Voltage Limits | 177-660 V |
| Sustainable Offer Status | Green Premium product |
| Transmission Rate | 4800, 9600 or 19200 bps |
| Type | Module |
| Type Of Cooling | forced convection |
| Type Of Start | start with torque control (current limited to 3.5 In) |
| UNSPSC | 39121521 |
| UPC, UPC Code | 785901694946 |
| Use With | Altistart 22; Asynchronous Motors |
| Utilisation Category | AC-53A |
| Vibration Resistance | 1 gn 13-200 Hz)EN/IEC 60068-2-6 || 1.5 mm 2-13 Hz)EN/IEC 60068-2-6 |
| Voltage - Load | 208 ~ 600V |
| Voltage - Supply | 177V ~ 660V |
| Warranty | 18 months |
| Warranty Description | Contractual Warranty:18 months |
| Wattage - Load | 55927 W |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| Width | 206 mm, 8.1 in |
| With Bypass / No Bypass | With Bypass |