mpn:
brand:
name: SCHNEIDER ELECTRIC
manufacturer:
MPN:
Attributes
| Key ^ | Value |
|---|---|
| Accuracy Error | +/- 6 arc min |
| Ambient Air Temperature For Operation | -25-40 ?C |
| Ambient Air Temperature For Storage | -25-70 ?C |
| Angular Acceleration | 200000 rad/s? |
| California Proposition 65 : WARNING: This product can expose you to chemicals including | Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Centring Collar Depth | 2 mm |
| Centring Collar Diameter | 73 mm |
| China Rohs Regulation | X |
| Circle Diameter Of The Mounting Holes | 98.99 mm |
| Continuous Stall Torque, Peak Stall Torque | 3.82 N.m |
| Device Short Name | BRS3 |
| Electrical Connection | terminal box |
| Environmental Disclosure | ENVPEP111101EN |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Holding Brake | without |
| Holding Torque | 4.52 N.m |
| Ip Degree Of Protection | shaft bushing IP41 EN/IEC 60034-5 || total except shaft bushing IP56 EN/IEC 60034-5 |
| Length | 141 mm |
| Line Rated Current | 2 A |
| Maximum Axial Force Fa | 175 N tensile force) || 30 N force pressure) |
| Maximum Mechanical Speed | 3000 rpm |
| Maximum Radial Force Fr | 100 N first shaft end) || 50 N second shaft end) |
| Maximum Starting Frequency | 5.3 kHz |
| Mercury Free, Pvc Free, Rohs Exemption Information | Yes |
| Motor Flange Size | 85 mm |
| Motor Type | 3-phase stepper motor |
| Mounting Holes Diameter | 6.5 mm |
| Mounting Support | flange |
| Net Weight | 3.2 kg |
| Nominal Torque | 4 N.m |
| Number Of Motor Poles | 6 |
| Number Of Mounting Holes | 4 |
| Product Or Component Type | motion control motor |
| Range Compatibility | Lexium SD3 |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| Relative Humidity | 15-85 % without condensation |
| Resistance | 5.8 Ohm winding) |
| Resolution | 1.8 ?, 0.9 ?, 0.72 ?, 0.36 ?, 0.18 ?, 0.09 ?, 0.072 ?, 0.036 ? step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution |
| Rotor Inertia | 2.2 kg.cm? |
| Second Shaft | without second shaft end |
| Service Life In Hours | 20000 h bearing) |
| Shaft Diameter | 9.5 mm |
| Shaft End | untapped |
| Shaft Length | 30 mm |
| Standards | IEC 60072-1 || EN 50347 |
| Supply Voltage Limits | 230-230 V AC || 325-325 V DC |
| Sustainable Offer Status | Green Premium product |
| Temperature Class | F winding IEC/EN 60034-1 |
| Time Constant | 9 ms |
| Type Of Cooling | natural convection |
| Vibration Resistance | 20 m/s? maximum || A EN/IEC 60034-14 |
| Warranty | 18 months |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |