mpn:
brand:
manufacturer:
MPN:
Description:
Shop SQUARE D at Mayer. TeSys D reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 24 V DC coil
Attributes
| Key ^ | Value |
|---|---|
| [Icw] Rated Short-Time Withstand Current | 60 A 40 ?C - 10 min for power circuit || 138 A 40 ?C - 1 min for power circuit || 260 A 40 ?C - 10 s for power circuit || 430 A 40 ?C - 1 s for power circuit || 100 A - 1 s for signalling circuit || 120 A - 500 ms for signalling circuit || 140 A - 100 ms for signalling circuit |
| [Ith] Conventional Free Air Thermal Current | 10 A (at 60 ?C) for signalling circuit || 50 A (at 60 ?C) for power circuit |
| [Uc] Control Circuit Voltage | 24 V DC |
| [Ui] Rated Insulation Voltage | power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || signalling circuit 690 V IEC 60947-1 || signalling circuit 600 V CSA || signalling circuit 600 V UL |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV IEC 60947 |
| Ambient Air Temperature For Operation | -40-60 ?C || 60-70 ?C with derating |
| Ambient Air Temperature For Storage | -60-80 ?C |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| Auxiliary Contacts Type | mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1 |
| Average Impedance | 2 mOhm - Ith 50 A 50 Hz for power circuit |
| California Proposition 65 : WARNING: This product can expose you to chemicals including | Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
| China Rohs Regulation | Product out of China RoHS scope. Substance declaration for your information. |
| Circularity Profile | ENVEOLI1102030EN |
| Climatic Withstand | IACS E10 || IEC 60947-1 Annex Q category D |
| Coil Technology | built-in bidirectional peak limiting diode suppressor |
| Connections - Terminals | control circuit screw clamp terminals 1 1-4 mm?flexible without cable end || control circuit screw clamp terminals 2 1-4 mm?flexible without cable end || control circuit screw clamp terminals 1 1-4 mm?flexible with cable end || control circuit screw clamp terminals 2 1-2.5 mm?flexible with cable end || control circuit screw clamp terminals 1 1-4 mm?solid || control circuit screw clamp terminals 2 1-4 mm?solid || power circuit screw clamp terminals 1 2.5-10 mm?flexible without cable end || power circuit screw clamp terminals 2 2.5-10 mm?flexible without cable end || power circuit screw clamp terminals 1 1-10 mm?flexible with cable end || power circuit screw clamp terminals 2 1.5-6 mm?flexible with cable end || power circuit screw clamp terminals 1 1.5-10 mm?solid || power circuit screw clamp terminals 2 2.5-10 mm?solid |
| Contactor Application | motor control || resistive load |
| Control Circuit Type | DC standard |
| Control Circuit Voltage Limits | 0.1...0.25 Uc -40-70 ?C drop-out DC || 0.7...1.25 Uc -40-60 ?C operational DC || 1...1.25 Uc 60-70 ?C operational DC |
| Depth | 101 mm |
| Device Presentation | preassembled with reversing power busbar |
| Device Short Name | LC2D |
| Environmental Disclosure | ENVPEP110230EN |
| Eu Rohs Directive | Compliant with Exemptions |
| Fire Resistance | 850 ?C IEC 60695-2-1 |
| Flame Retardance | V1 conforming to UL 94 |
| Height | 85 mm |
| Hold-In Power Consumption In W | 5.4-5.4 W 20 ?C |
| Inrush Power In W | 5.4-5.4 W 20 ?C) |
| Insulation Resistance | > 10 MOhm for signalling circuit |
| Interlocking Type | mechanical |
| Ip Degree Of Protection | IP20 front face IEC 60529 |
| Irms Rated Making Capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 || 250 A DC for signalling circuit conforming to IEC 60947-5-1 || 550 A at 440 V for power circuit conforming to IEC 60947 |
| Maximum Horse Power Rating | 2 hp at 115 V AC 60 Hz for 1 phase motors || 5 hp at 230/240 V AC 60 Hz for 1 phase motors || 10 hp at 200/208 V AC 60 Hz for 3 phase motors || 10 hp at 230/240 V AC 60 Hz for 3 phase motors || 20 hp at 460/480 V AC 60 Hz for 3 phase motors || 30 hp at 575/600 V AC 60 Hz for 3 phase motors |
| Maximum Operating Rate | 3600 cyc/h 60 ?C |
| Mechanical Durability | 30 Mcycles |
| Mechanical Robustness | vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor closed15 Gn for 11 ms || shocks contactor open8 Gn for 11 ms |
| Mercury Free, Pvc Free, Rohs Exemption Information | Yes |
| Minimum Switching Current | 5 mA for signalling circuit |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Motor Power Kw | 7.5 kW at 220...230 V AC 50-60 Hz || 15 kW at 380...400 V AC 50-60 Hz || 15 kW at 415 V AC 50-60 Hz || 15 kW at 440 V AC 50-60 Hz || 18.5 kW at 500 V AC 50-60 Hz || 18.5 kW at 660...690 V AC 50-60 Hz |
| Mounting Support | rail || plate |
| Net Weight | 1.127 kg |
| Non-Overlap Time | 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact |
| Operating Altitude | 0...9842.52 ft (0...3000 m) |
| Operating Time | 53.55...72.45 ms closing || 16...24 ms opening |
| Overvoltage Category | III |
| Pole Contact Composition | 3 NO |
| Poles Description | 3P |
| Pollution Degree | 3 |
| Power Dissipation Per Pole | 2 W AC-3 || 5 W AC-1 || 2 W AC-3e |
| Product Certifications | UL || CSA || RINA || GOST || CCC || DNV || LROS (Lloyds register of shipping) || GL || BV || UKCA |
| Product Name | TeSys D || TeSys Deca |
| Product Or Component Type | reversing contactor |
| Protective Cover | with |
| Protective Treatment | TH IEC 60068-2-30 |
| Range | TeSys || TeSys Deca |
| Rated Breaking Capacity | 550 A at 440 V for power circuit conforming to IEC 60947 |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Signalling Circuit Frequency | 25...400 Hz |
| Standards | CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1 |
| Sustainable Offer Status | Green Premium product |
| Tightening Torque | control circuit 1.7 N.m screw clamp terminals flat ? 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 2.5 N.m screw clamp terminals flat ? 6 mm || power circuit 2.5 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals pozidriv No 2 || power circuit 2.5 N.m screw clamp terminals pozidriv No 2 |
| Time Constant | 28 ms |
| Utilisation Category | AC-1 || AC-3 || AC-3e |
| Warranty | 18 months |
| Width | 90 mm |