mpn:
brand:
manufacturer:
MPN:
Description:
Linear Ball Bearing, Type Open, Inside Dia. 16 mm, Outside Dia. 26 mm, Material Delrin, Accelerated Speed 150 mm/sec, Between Grooves (mm) 24.6 mm, Dimension C 36 in, Dimension C1 24.6 mm, Dimension F 3 mm, Dimension G 0 mm from Center Line, Dimension T 16, Dynamic Load Capacity (N) 2,200 N, For Use With Thomson Shafting, Inside Dia. Tolerance + .013, Maximum Operating Temperature 185 Degrees F, Minimum Operating Temperature 0 Degrees F, Length (In.) 36 mm, Retention Hole Dia. (mm) 3 mm
Attributes
| Key ^ | Value |
|---|---|
| Accelerated Speed | 150 mm/sec |
| Between Grooves (mm), Dimension C1 | 24.6 mm |
| Bore Dia., Inside Dia. | 16 mm |
| Dimension C | 36 in |
| Dimension F, Retention Hole Dia. (mm) | 3 mm |
| Dimension G | 0 mm from Center Line |
| Dimension T | 16 |
| Dynamic Load Capacity (N) | 2,200 |
| For Use With | Thomson Shafting |
| Inside Dia. Tolerance | + .013 |
| Item | Linear Ball Bearing |
| Length (mm) | 36 |
| Material | Delrin |
| Outside Dia. | 26 mm |
| Required Housing Bore Dia. (mm) | 26 |
| Retention Hole Location | 0mm from the Center line |
| Self-Alignment | Yes |
| Slot Angle (Degrees) | 70 |
| Slot Width (mm) | 8.12 |
| Steady State Speed | 3 mm/sec |
| Type | Open |