brand:
manufacturer:
Attributes
| Key ^ | Value |
|---|---|
| Application | For General Drilling, General Mechanical Engineering |
| Coolant Fed | Coolant Through |
| Coolant Through | Yes |
| Country of Origin (subject to change) | Germany |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.1850 |
| Depth x Dia. Ratio, Depth:Dia. Ratio | 5xD |
| Drill Bit Dimension Type, Measurement System | Wire |
| Drill Bit Finish, Finish - Machining | TiAlN+AlCrN |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Material | Cobalt |
| Drill Bit Point Angle | 140 Degrees |
| Drill Bit Point Type, Point Type | Split point |
| Drill Bit Size | #13 |
| Drill Diameter Tolerance | M7 |
| Drill Length Class | Jobber Length |
| Drill Point Length | 0.855mm |
| Drilling Depth | 29.00mm |
| Flute Length | 1 3/8 in |
| Flute Type | Spiral |
| Grade, Material Grade - Machining | WJ30EJ |
| Item | Jobber Length Drill Bit |
| List Number | DC170 |
| Material, Material - Machining | Carbide |
| Maximum Drilling Depth | 1 9/64 in |
| Number of Coolant Holes, Number of Flutes | 2 |
| Overall Length | 2 29/32 in |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application ISO Code | K, P |
| Secondary Material Application | Hardened Steel |
| Secondary Material Application ISO Code | H |
| Series | Supreme |
| Shank Dia. | 6.00 mm |
| Shank Length | 1 13/32 in |
| Shank Type, Shank Type - Machining | Straight |
| Sheeter Drill | No |
| Standards | DIN 6537 L |