| Blade size | 0.6 x 3.5 mm |
| Certificate No. (ATEX) | DEMKO15ATEX1346U |
| Certificate No. (CSA) | 12400-391 |
| Certificate No. (IECEX) | IECEXULD15.0003U |
| Certificate No. (UR) | E60693 |
| Clamping range, max., Connection cross-section, stranded, max., Wire connection cross section, finely stranded, max., Wire connection cross-section, solid core, max. | 4?mm? |
| Clamping range, min. | 0.05?mm? |
| Clamping screw | M 2.5 |
| Colour | blue |
| Conductor size Factory wiring max. (UR), Conductor size Field wiring max. (UR), Wire cross section max. (CSA) | 12 AWG |
| Conductor size Factory wiring min. (UR), Conductor size Field wiring min. (UR) | 22 AWG |
| Connection cross-section, stranded, min., Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max., Wire cross-section, finely stranded, two clampable wires, max. | 1.5?mm? |
| Connection direction | on side |
| Continuous operating temp., max. | 120??C |
| Continuous operating temp., min. | -50??C |
| Current (ATEX), Current (IECEX) | 21 A |
| Current at maximum wires | 32?A |
| Current size B (UR), Current size C (UR) | 20 A |
| Current size C (CSA) | 25 A |
| Depth including DIN rail | 63?mm |
| eClass 9.0, eClass 9.1 | 27-14-11-20 |
| End cover plate required, Explosion-tested version, N-function | Yes |
| ETIM 6.0, ETIM 7.0 | EC000897 |
| Ex 2014/34/EU label | II 2 G D |
| Gauge to IEC 60947-1 | A3 |
| Height | 69?mm |
| Height (inches) | 2.717?inch |
| Levels cross-connected internally, PE connection, PE function, PEN function | No |
| Marking EN 60079-7 | Ex eb II C Gb |
| Material | Wemid |
| Max. voltage (ATEX), Max. voltage (IECEX) | 275 V |
| Net weight | 11.81?g |
| Number of clamping points per level, Number of levels, Number of potentials | 2 |
| Number of connections | 4 |
| Number of potentials per tier, Number of similar terminals, Torque level with DMS electric screwdriver | 1 |
| Open sides | right |
| Operating temperature range | For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity |
| Pollution severity | 3 |
| Power loss in accordance with IEC 60947-7-x | 0.77?W |
| Rail | TS 35 |
| Rated cross-section, Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max., Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 2.5?mm? |
| Rated current | 24?A |
| Rated impulse withstand voltage | 6 kV |
| Rated voltage | 400?V |
| Standards | IEC 60947-7-1 |
| Storage temperature | 10 ?C...40 ?C |
| Storage temperature, max. | 40??C |
| Storage temperature, min. | 10??C |
| Stripping length | 10?mm |
| Tightening torque, max. | 0.6?Nm |
| Tightening torque, min. | 0.4?Nm |
| TS 35 offset | 35.5?mm |
| Type of connection | Screw connection |
| Type of mounting | Snap-on |
| UL 94 flammability rating | V-0 |
| Version | Screw connection, for plug-in cross-connector, One end without connector |
| Voltage size B (UR), Voltage size C (CSA), Voltage size C (UR) | 300 V |
| Volume resistance according to IEC 60947-7-x | 1.33?m? |
| Weight | 9.27?g |
| Width | 5.1?mm |
| Width (inches) | 0.201?inch |
| Wire connection cross section AWG, max. | AWG 12 |
| Wire connection cross section AWG, min. | AWG 30 |
| Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min., Wire connection cross section, finely stranded, two clampable wires, min., Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min., Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min., Wire connection cross-section, finely stranded, min., Wire connection cross-section, solid core, min. | 0.5?mm? |
| Wire cross section max. (ATEX), Wire cross section max. (IECEX) | 4 mm? |
| Wire cross section min. (CSA) | 26 AWG |
