| Coolant Fed | Non-Coolant Through |
| Coolant Through | No |
| Country of Origin (subject to change) | United States |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.3020 |
| Depth x Dia. Ratio | 9xD |
| Depth:Dia. Ratio | 9xD |
| Drill Bit Dimension Type | Letter |
| Drill Bit Finish | Uncoated |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Material | Carbide-Tipped |
| Drill Bit Point Angle | 135 Degrees |
| Drill Bit Point Type | 4 Facet Point |
| Drill Bit Size | N |
| Drill Diameter Tolerance | +0.0000 in /-0.0010 in |
| Drill Length Class | Jobber Length |
| Drill Point Length | 1.59mm |
| Drilling Depth | 2.6000" |
| Finish - Machining | Bright (Uncoated) |
| Flute Length | 3 3/16 in |
| Flute Type | Spiral |
| Helix Angle | 30 Degrees |
| Item | Jobber Length Drill Bit |
| Material | Carbide-Tipped |
| Material - Machining | Carbide Tipped |
| Maximum Drilling Depth | 3 3/16 in |
| Measurement System | Letter |
| Number of Flutes | 2 |
| Overall Length | 4 1/2 in |
| Point Type | Split |
| Primary Material Application | All Materials |
| Primary Material Application ISO Code | H, K, M, N, O, P, S |
| Shank Dia. | 7.67 mm |
| Shank Length | 1 5/16 in |
| Shank Type - Machining | Straight |
| Spiral Direction | Right Hand |
| Standards | Not Rated |
