| Coolant Fed | Non-Coolant Through |
| Coolant Through | No |
| Country of Origin (subject to change) | United States |
| Cutting Direction, Spiral Direction | Right Hand |
| Decimal Equivalent | 0.5000 |
| Depth x Dia. Ratio, Depth:Dia. Ratio | 8xD |
| Drill Bit Dimension Type, Measurement System | Fractional Inch |
| Drill Bit Finish | Uncoated |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Material, Material | Carbide-Tipped |
| Drill Bit Point Angle | 135 Degrees |
| Drill Bit Point Type | 4 Facet Point |
| Drill Bit Size, Shank Dia. | 1/2 in |
| Drill Diameter Tolerance | +0.0000 in /-0.0010 in |
| Drill Length Class | Jobber Length |
| Drill Point Length | 2.63mm |
| Drilling Depth | 3-1/2" |
| Finish - Machining | Bright (Uncoated) |
| Flute Length, Maximum Drilling Depth | 4 1/2 in |
| Flute Type | Spiral |
| Helix Angle | 30 Degrees |
| Item | Jobber Length Drill Bit |
| Material - Machining | Carbide Tipped |
| Number of Flutes | 2 |
| Overall Length | 6 in |
| Point Type | Split |
| Primary Material Application | All Materials |
| Primary Material Application ISO Code | H, K, M, N, O, P, S |
| Shank Length | 1 1/2 in |
| Shank Type - Machining | Straight |
| Standards | Not Rated |
