| Basic Material | Steel |
| Countersink Angle | Not Applicable |
| Country of Origin (subject to change) | Multiple |
| Dia./Thread Size | 1"-14 |
| Dimensional Standards | ASME B18.3 |
| Drive Size | 3/4 in |
| Drive Type | Hex Socket |
| Fastener Finish | Black Oxide |
| Fastener Industry Standards | ASME B18.3 |
| Fastener Length | 7 in |
| Fastener Thread Type | UNF (Fine) |
| Finish | Black Oxide |
| Finish Type | Black Oxide |
| Flange Diameter | Not Applicable |
| Flange Thickness | Not Applicable |
| Head Dia. | 0.125 in |
| Head Diameter | 0.125 in |
| Head Height | 0.0625 in |
| Head Type | Standard |
| Item | Socket Head Cap Screw |
| Length | 7 in |
| Length (Straight Wireway) | 7 in |
| Material | Steel |
| Material Grade | Alloy Steel |
| Material Type | Steel |
| Maximum Temperature | 302 Degrees F |
| Min. Tensile Strength | 170,000 psi |
| Min. Thread Length | 2 1/2 in |
| Minimum Temperature | -58 Degrees F |
| Minimum Thread Length | 2 1/2 in |
| Pack Size | Small Pack |
| Package Quantity | 1 |
| Rockwell Hardness | C37 to C45 |
| Screw Head Type | Cylindrical |
| Screw Length | 7 in |
| Screw Style | Socket Head Cap Screw |
| Special Features | Not Applicable |
| Standards | ASME B18.3 |
| System of Measurement | Inch |
| Temp. Range | - 58 Degrees F to 302 Degrees F |
| Tensile Strength | 170,000 psi |
| Thread Direction | Right Hand |
| Thread Length | 2 1/2 in |
| Thread Pitch | Not Applicable |
| Thread Size | 1 in |
| Thread Style | Partially Threaded |
| Thread Type | Fine |
| Vent Hole Diameter | Not Applicable |
| Vented Hole Size | Not Vented |
