- mpnDCD36-1"-19MM-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 2.0? |
| Axial Motion | 0.030 in, 0.76 mm |
| B1 Shaft Penetration | 1.458 in, 37.0 mm |
| B2 Shaft Penetration | 1.458 in, 37.0 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 225 lb-in, 25.45 Nm |
| Dynamic Torque Reversing | 112.5 lb-in, 12.73 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Clamp Screw | M6 |
| Hex Wrench Size | 5.0 mm |
| Hub Width LH | 1.050 in, 26.7 mm |
| Large Bore B1 | 1.000 in |
| Length L | 3.080 in / 78.2 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs and Center Spacer:. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 2 ea |
| Outer Diameter OD | 2.250 in, 57.2 mm |
| Parallel Misalignment | 0.012 in, 0.30 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 16 Nm |
| Small Bore B2 | 19 mm |
| Static Torque | 450 lb-in, 50.9 Nm |
| Temperature | -10?F to 200?F |
| Torsional Stiffness | 769 lb-in/Deg, 86.9 Nm/. |
| UPC | 63452914892 |
| Weight (lbs.) | 0.4400 |