Attributes

Key Value
Alternate Product NameNordbak Pneu-Wear
ApplicationProtect Equipment Like .
Application FamilyMetals
Brand & SeriesLOCTITE Pneu-Wear PC 73.
Color FamilyGray
Compatible MaterialsMetals
Compatible PrimerLoctite 7227, Loctite B.
Container Type - Adhesi.Pail
Country of Origin (subj.United States
Cure MethodAmbient
Cured ColorGray
Epoxy ColorGray
Epoxy ContainerPail
Epoxy Max. Temp250 Degrees to 299 Deg.
FeaturesAbrasion Resistant, Eas.
For Use OnMetal
For Use With-
Full Cure6 hr
Full Cure Time6 hr
Functional CureNot Rated
Hardener ColorTan
Hardness at Full Cure86 Shore D
Included ComponentsResin and Hardener
Includes25 lb Kit, Resin and Ha.
Interior/ExteriorInterior/Exterior
ItemEpoxy Adhesive
Low OdorNo
Marine GradeNo
Materials BondedMetal
Maximum Performance Tem.250 Degrees F
Minimum Performance Tem.-65 Degrees F
Mixing Ratio4:1
Non-SaggingNo
Primary ApplicationsMetals
Resin ColorDark Gray
Resin TypeEpoxy
SeriesPneu-Wear
Shear Strength800 psi
Shear Strength (PSI)800 to 2400
Size25 lb
StandardsASTM D2240, ISO 11359-2.
Structural Adhesive TypeEpoxy Adhesive
Temp. Range (F)-65 Degrees to 250 Deg.
Tensile Strength2,550 psi
Total Volume25 lb
TypeFine Particle Abrasion
VOC Content Weight10 g/L
VOC Content Weight Perc.1%
Water ResistanceNot Water-Resistant
Work Life30 min
Working Time30 min
© 2025 · Data Alchemy · Version 60 · ts:1760052239
prev


As an Amazon Associate I earn from qualifying purchases.

1759752758.4737