- mpnM-20161
- brandname: Koyo
- manufacturername: Koyo
Attributes
| Key | Value |
|---|
| Application | Automobile Field, Drive. |
| Bearing Design | M-1 |
| Bearing Industry Number | 20161 |
| Bore Dia. (In.) | 1.25 in |
| Bore Dia. (mm) | 31.75 mm |
| Bore Diameter | 1 1/4 in |
| Cage Material | Steel |
| Cage Material Grade | Not Applicable |
| Closure | Open |
| Compatible Ring Grainge. | 779KE9 |
| Compatible Ring Manufac. | IR-1616 |
| Country of Origin (subj. | Japan |
| Dynamic Load Capacity (. | 8,590 lb |
| Dynamic Load Capacity (. | 38,200 N |
| Dynamic Radial Load Cap. | 10,100 lbf |
| Full Complement | Yes |
| Item | Needle Roller Bearing |
| Lubricant Material | Grease, Oil |
| Lubrication Openings | Not Applicale |
| Maximum Speed | 3,500 RPM |
| Maximum Temperature | 250 Degrees F |
| Minimum Temperature | -4 Degrees F |
| Needle Bearing Type | Drawn Cup Needle Roller. |
| Number of Rows | One |
| Outside Dia. (In.) | 1.5 in |
| Outside Dia. (mm) | 38.1 mm |
| Outside Diameter | 1 5/8 in |
| Overall Width | 1 in |
| Ring Material | Alloy Steel |
| Ring Material Grade | SUJ 2 |
| Roller Material | Alloy Steel |
| Roller Material Grade | SUJ 2 |
| Seal Material | Not Applicable |
| Seal Type | Not Applicable |
| Standards | ANSI/ABMA 18.2, ASTM F2. |
| Static Load Capacity (L. | 20,840 lb |
| Static Load Capacity (N) | 92,700 N |
| Static Radial Load Capa. | 19,470 lbf |
| System of Measurement | Inch |
| Type | Drawn Cup |
| Width (In.) | 1 in |
| Width (mm) | 25.4 mm |