- mpnBS21-13MM-5/16"-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 1.5? |
| Axial Motion | 0.016 in, 0.40 mm |
| B1 Shaft Penetration | 0.804 in, 20.4 mm |
| B2 Shaft Penetration | 0.804 in, 20.4 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 60 lb-in, 6.80 Nm |
| Dynamic Torque Reversing | 30 lb-in, 3.40 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Set Screw | M4 |
| Hex Wrench Size | 2.0 mm |
| Hub Width LH | 0.590 in, 15.00 mm |
| Large Bore B1 | 13 mm |
| Length L | 1.688 in / 42.9 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminu. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 4 ea |
| Outer Diameter OD | 1.313 in, 33.3 mm |
| Parallel Misalignment | 0.006 in, 0.15 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 2.2 Nm |
| Small Bore B2 | 0.313 in |
| Static Torque | 120 lb-in, 13.6 Nm |
| Temperature | -40?F to 200?F |
| Torsional Stiffness | 400 lb-in/Deg, 45 Nm/Deg |
| UPC | 63452914338 |
| Weight (lbs.) | 0.1650 |