- mpnC81664
- brandname: CLEVELAND
- manufacturername: CLEVELAND
CLEVELAND Sq. End Mill,Single End,Carb,5/32" C81664
- Brand: CLEVELAND
- PartNumber: C81664
- PackageQuantity: 1
- Binding: Misc.
- Manufacturer: CLEVELAND
- Label: CLEVELAND
Attributes
| Key | Value |
|---|
| Cast Iron (K) Compatibi. | Yes |
| Catalog Page | N/A |
| Center Cutting | Yes |
| Chip-Breaker | No |
| Construction | General Purpose |
| Corner Radius | 0.000" |
| Country of Origin | USA |
| Country of Origin (subj. | United States |
| Cutter Diameter | 5/32 in |
| Cutting Direction | Right Hand |
| Cutting Direction - Mac. | Right Hand |
| Decimal Equivalent | 0.1562" / 3.97mm |
| Diameter Fractional | 5/32" |
| Dimension Type | Fractional Inch |
| Double Ended | No |
| Drilling Tool Configura. | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Material | Carbide |
| End Mill Style | Square |
| End Style | Corner Radius |
| Finish | TiAlN, TiAlN Coated |
| Finish - Machining | TiAlN |
| Flute Type | Spiral |
| Grade | General Purpose |
| Hand of Spiral Cut | RHS / RHC |
| Hardened (H) Compatibil. | No |
| Helix Angle | 30 ?, 30 deg, 30 Degre. |
| Item | Square End Mill |
| Item? | 33GJ72 |
| Length of Cut | 9/16 in, 0.5625" / 14.2. |
| List Number | CEM-SE-3-TA |
| List Style | CEM-SE-3 |
| Material | Carbide, Solid Carbide |
| Material - Machining | Carbide |
| Material Grade | General Purpose |
| Material Grade - Machin. | General Purpose |
| Measurement System | Fractional Inch |
| Mfr. Model? | C81664 |
| Milling Dia. | 5/32 in |
| Milling Diameter | 5/32", 5/32 in |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (N) Compati. | Yes |
| Number of Flutes | 3 |
| Overall Length | 2.0000" / 50.80mm, 2 in |
| Primary Material Applic. | Cast Iron; Stainless St. |
| Primary Material Applic. | K; M; P, K, M, P |
| Series | CEM-SE-3 |
| Shank | Straight without Flats |
| Shank Dia. | 3/16 in |
| Shank Diameter | 0.1875" / 4.76mm, 3/16 . |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Single End/Double End | Single End |
| Stainless (M) Compatibi. | Yes |
| Steel (P) Compatibility | Yes |
| Style | CEM-SE-3-TA |
| Super Alloy (S) Compati. | No |
| Surface Condition | TiAlN |
| Tool Size | 5/32" x 3/16" x 9/16" x. |
| Type | Center Cutting General . |
| UNSPSC | 23172005 |
All Prices
| Img | Seller | Supplier SKU | Min Price | MOQ | In Stock | Lead Time | Brand | Weight | Preferred Tier |
|---|
 | MRO Supply | 6119474 | 14.24 | 3 | In Stock | | Cleveland | | 14.24 @ 3 |
 | Zoro | G8847921 | 17.0 | 1 | In Stock | | Cleveland | 0.03 | 17.0 @ 1 |
 | Megadepot | C81664 | 17.16 | 1 | In Stock | | Cleveland | | 17.16 @ 1 |
 | usmegastore.com | C81664 | 17.85 | 1 | In Stock | | Cleveland | | 17.85 @ 1 |
| Grainger | 33GJ72 | 25.06 | 1 | In Stock | | CLEVELAND | | 25.06 @ 1 |