- mpn2002G-C01330
- brandname: CLEVELAND
- manufacturername: CLEVELAND
Attributes
| Key | Value |
|---|
| Aircraft Drill | No |
| Coolant Fed | Non-Coolant Through |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.0625 in -0.5000 in, 0. |
| Depth:Dia. Ratio | 4xD |
| Double Margin | No |
| Drill Bit Case Type | Metal Drill Index |
| Drill Bit Grouping | Set |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Point Type | Conventional Point |
| Drill Bit Size | #60 to #1, 1/16 in to 1. |
| Drill Bit Sizes Included | #1, #10, #11, #12, #13,. |
| Drill Diameter Tolerance | +0.0000 in /-0.0005 in . |
| Drill Length Class | Jobber Length |
| Finish - Machining | Bright (Uncoated) |
| Flute Length | Not Applicable |
| Flute Type | Spiral |
| Helix Angle | 28 Degrees |
| Includes | Metal Drill Index |
| Item | Jobber Drill Bit Set |
| Largest Drill Bit Size | Z |
| Material - Machining | High Speed Steel |
| Material Grade - Machin. | W4 |
| Measurement System | Fractional Inch, Wire |
| Number of Coolant Holes | 0 |
| Number of Drill Bits | 115 |
| Number of Flutes | 0 |
| Overall Length | Not Applicable |
| Primary Material Applic. | All Materials |
| Primary Material Applic. | P, K |
| Secondary Material Appl. | Aluminum |
| Secondary Material Appl. | N |
| Series | 2002G |
| Shank Dia. | #60 to #1, 1/16 in to 1. |
| Shank Type - Machining | Straight |
| Sheeter Drill | No |
| Smallest Drill Bit Size | 1/16 in |
| Spiral Direction | Right Hand |
| Standards | ASME B94.11M |
| Web Construction | Tapered |
| Web Thinning | Web Thinned |