- mpnDCD26-20MM-3/4"-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 2.0? |
| Axial Motion | 0.020 in, 0.51 mm |
| B1 Shaft Penetration | 1.029 in, 26.1 mm |
| B2 Shaft Penetration | 1.029 in, 26.1 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 90 lb-in, 10.15 Nm |
| Dynamic Torque Reversing | 45 lb-in, 5.08 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Clamp Screw | M4 |
| Hex Wrench Size | 3.0 mm |
| Hub Width LH | 0.710 in, 18.0 mm |
| Large Bore B1 | 20 mm |
| Length L | 2.165 in / 55.0 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs and Center Spacer:. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 2 ea |
| Outer Diameter OD | 1.625 in, 41.3 mm |
| Parallel Misalignment | 0.010 in, 0.25 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 4.6 Nm |
| Small Bore B2 | 0.750 in |
| Static Torque | 180 lb-in, 20.3 Nm |
| Temperature | -10?F to 200?F |
| Torsional Stiffness | 375 lb-in/Deg, 42.4 Nm/. |
| UPC | 63452914717 |
| Weight (lbs.) | 0.3050 |