- mpnSFL20-12
- brandname: AUTONICS
- manufacturername: AUTONICS
Attributes
| Key | Value |
|---|
| Ambient humidity | 35 to 85 %RH, storage: . |
| Ambient temperature | -10 to 55???, storage: . |
| Auxiliary output(AUX 1/. | "NPN or PNP open collec. |
| Current consumption | Emitter: ?106mA, receiv. |
| Detection capability | ? 14 mm (finger) |
| Dielectric strength | 1,000VAC 50/60Hz for 1 . |
| Effective aperture angl. | Within ? 2.5 ? when the. |
| Environment_Ambient ill. | Sunlight: Max. 10,000lx. |
| General functions | Self-test, alarm for re. |
| Insulation resistance | Over 20M? (at 500VDC me. |
| International standards | UL 508, CSA C22.2 No. 1. |
| Lamp output(LAMP 1/2) | NPN or PNP open collect. |
| Light source | Infrared LED(855nm) |
| Long mode | 0.2 to 10 m |
| Material | Case: Aluminum, Front c. |
| Noise immunity | The square wave noise (. |
| Number of optical axes | 95 |
| Optical axis pitch | 9mm |
| Others functions | Change of sensing dista. |
| Power supply | 24 VDC |
| Protection circuit | Reverse power polarity,. |
| Protection structure | IP65, IP67(IEC standard) |
| Safety related output: . | NPN or PNP open collect. |
| Safety-related functions | Interlock (reset hold),. |
| Sensing distance | Short - Long mode (sett. |
| Sensing target | Opaque |
| Sensing type | Through-beam type |
| Series connection | Max. 3 SET (? 300 optic. |
| Shock | 100 m/s? ( 10 G), pulse. |
| Short mode | 0.2 to 5 m |
| Synchronization type | Timing method by synchr. |
| Vibration | 0.7 mm amplitude at fre. |