mpn:
brand:
manufacturer:
MPN:
Description:
Shop Baldor CXL181542 and trust MRO to be your reliable Baldor supplier to experience the difference that quality and expertise can make. Trusted since 1898. Fast, Free Shipping.
Attributes
| Key ^ | Value |
|---|---|
| Agency approvals | UL |
| Ambient temperature (?C) | 40 |
| Auxillary box | No auxillary box |
| Base indicator | Rigid |
| Bearing grease type | Polyrex EM (-20F +300F) |
| Break-down torque | 14 lb-ft |
| Current @ voltage | 19.000 A @ 115.0 V |
| Design code, KVA code | L |
| Drip cover | No drip cover |
| Duty rating | CONT |
| Efficiency @ 100% load | 70.0 % |
| Electrically isolated bearing | Not electrically isolated |
| Enclosure | XPFC |
| Feedback device | No feedback |
| Frame | 184C |
| Frame material | Steel |
| Frequency | 60.00 Hz |
| Full load torque | 0 lb-ft |
| Heater indicator | No heater |
| High voltage full load amps | 9.5 a |
| Insulation class | F |
| Inverter code | Not inverter |
| Lifting lugs | No lifting lugs |
| Line-line res @ 25? C | 1.16 Ohms A Ph / 0.581 Ohms B Ph |
| Locked bearing indicator | No locked bearing |
| Locked-rotor torque | 16 lb-ft |
| Motor lead quantity/wire size | 4 @ 14 AWG, A PH |
| Motor lead termination | Flying leads |
| Motor letter type | Cap start, induction run |
| Motor standards | NEMA |
| Motor type | X3628L |
| Mounting arrangement | F1 |
| No-load current | 0 A |
| Number of poles | 4 |
| Output @ frequency | 1.500 HP @ 60 HZ |
| Overall Length | 16.93 in |
| Phase | 1 |
| Power factor | 70 |
| Product family | General Purpose |
| Pull-up torque | 12 lb-ft |
| Pulley end bearing type | Ball |
| Pulley face code | C-face |
| Pulley shaft indicator | Standard |
| RoHS status | ROHS NON-COMPLIANT |
| Service factor | 1.15 |
| Shaft Diameter | 0.875 in |
| Shaft ground indicator | No shaft grounding |
| Shaft rotation | Reversible |
| Shaft slinger indicator | No slinger |
| Speed | 1725 RPM |
| Speed code | Single speed |
| Start configuration | DOL |
| Starting current | 68 A |
| Starting method | Direct on line |
| Synchronous speed @ frequency | 1800 RPM @ 60 HZ |
| Temp rise @ rated load | 67? C |
| Temp rise @ SF load | 76? C |
| Thermal device - winding | Normally closed thermostat |
| Vibration sensor indicator | No vibration sensor |
| Voltage @ frequency | 115.0 V @ 60 HZ |
| XP class and group | CLI GP D; CLII GP F,G |
| XP division | Division I |
| XP temp code | T3C |