Alternate Part No. | 684-MP725-0.02 |
Brand | Caddock |
Case Height | 8.26 mm |
Case Length | 8.13 mm |
Case Width | 2.79 mm |
Category | Resistors |
Composition | Thick Film |
Dielectric Strength | 1500 VAC (RMS) |
Element Material | Thick Film |
Failure Rate | - |
Features | Current Sense, Moisture Resistant, Non-Inductive |
Height - Seated (Max) | 0.120" (3.05mm) |
Insulation Resistance | 10000 MegaOhms |
Lead Length | 0.160 +/-0.010 in |
Lead Pitch | 0.200 +/-0.010 in. |
Length | 0.325 in |
Length Tolerance | +/- 0.020" |
Manufacturer | Caddock |
Manufacturer Part No. | MP725-0.020-5% |
Mfr | Caddock Electronics Inc. |
Mounting Type | Surface Mount |
Number of Terminations | 2 |
Operating Temperature | -55?C ~ 150?C |
Operating Temperature Range | + 25 C to + 150 C |
Package | Tape & Reel (TR) |
Package / Case | TO-263-3, D?Pak (2 Leads + Tab), TO-263AB |
Package Type | D-Pak |
Package/Case | DPAK |
Packaging | Tube |
Power (Watts) | 25W |
Power Dissipation | 2.5 W |
Power Rating | 25 W |
Product | Thick Film Resistors SMD |
Product Category | Thick Film Resistors - SMD |
Product Status | Active |
Resistance | 0.02 Ohms, 20 mOhms, 20 Megaohms |
Resistance Range | 1 to 99 Megaohms |
Series | MP725 Series, MP725 |
Size / Dimension | 0.325" L x 0.320" W (8.26mm x 8.13mm) |
Supplier Device Package | DPAK |
Temperature Coefficient | 0/ +300ppm/?C, 0 PPM / C, 300 PPM / C, 0 to 300 ppm/?C |
Termination | SMD |
Test Condition Power Rating | @ +25?C |
Thickness | 0.110 +/-0.010 in. |
Tolerance | 0.05 %, 5 %, ?5% |
Type | Surface Mount Power Film Resistors |
Voltage Rating | 200 V |
Width | 0.32 in |